aye what i did was went to autozone and bought some exhuast tubbing about 2" and it fit

 

Dan - would you know when you are receiving the items? i'm looking for bushings for the control arms both upper and lower, left and right. i'd rather shoot you over the payment when you do have it in stock. sorry but i don't want to send money and not know when i will receive the product.

thanks!!!

 

We just got 5 18-207-BL and 3 18-304-BL into stock.

Call me

 

My car makes a scrubbing sound when I hit minor bumps in the road and when I make sharp turns with moderate speed. I just replaced my shocks and that did not help. It sounds like the rear wheels are scrubbing the fender but the fender or tires show no wear and tear. I do have wide tires but the guy that sold those tires to me said he had no problem with his sc and those tires. I have also had my fenders rolled. HELP in GEORGIA!!!!!!!!!!!!!

 

you are rubbing. shave or roll your fenders,

 

i was just wondering if the rear prothane kit comes with subframe bushings??

 

same looking to good a set soon dan

 

still no diy write up for this? about to order a set

 

No it doesn't.

 

So...Update on these? In stock. If so I'm finally gonna order front and rear. Guess I'll do a full write up also. I just need my S. FL SC brothers to help.

 

so much worth it

 

just ordered a set this morning,the red ones are discontinued

 

does anyone know approx how much a shop would charge to install these? front/rear

 

my fronts were only 65.00 to install make sure that u keep ur metel sleeves that came with your previous bushings or u will have to use exhaust tubbing like i did

 

dan@assultech - so i finally got around to installing the bushing that i bought from you. can you please check your records if you sent me the right ones..

front uppers - I pressed out my stock bushings, lubed the inner sleeve you provided and put them in the upper control arm. question, i didn't even have the press the upper bushing, i just used my hands. is this normal?

lower control arm bushings - I was able to press these out and burn the rubber so what's left over was the inner sleeve. my problem now is that the inner sleeve doesn't fit inside the bushing. the lower control arm bushings is 2 different sizes. the stock inner sleeve DOES NOT fit the bushings you provided.

anyways, my car is up on jackstands and i cannot use it anymore until this is solved. please let me know if you gave me the right bushings or not because the front lower control arms doesn't fit.

if there's a write up on these, please let me know.. also, if anyone tackled this project on their own, please chime in because i need to use my car.

Thanks!!!