When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
First, I will assume that you have verified the motor that drives the mirror up-and-down is functioning properly. The next step is to check power to the transmission position switch. Look for a 7.5A fuse labeled "FR IG" and check to see if it's blown. It's in the No.1 J/B in the engine bay. There are 2 J/B's behind the driver side headlight, a square one and a triangular one. No.1 J/B is the square one.
Last edited by rkw77080; Sep 25, 2014 at 04:56 PM.
Hey,
Does anyone know why the mirrors don't reset back to the same position once back in drive, after tilting down in reverse???
Mine are off almost everytime :/
08 GS 350
Perhaps they go back to the memory setting and not the last adjusted setting. I'm not saying go away but you might want to look around the GS forum, this is the LS 430 area, unless you also have an LS430. Answer might be different for your car.
Perhaps they go back to the memory setting and not the last adjusted setting. I'm not saying go away but you might want to look around the GS forum, this is the LS 430 area, unless you also have an LS430. Answer might be different for your car.
yeah check the GS forums. Must be a different type of issue as I've never heard of it not going back, I've only heard of it not working at all or working perfectly.
Perhaps they go back to the memory setting and not the last adjusted setting. I'm not saying go away but you might want to look around the GS forum, this is the LS 430 area, unless you also have an LS430. Answer might be different for your car.
I seem to have fixed my problem simply by adjusting my mirrors. Turns out that The L-R Mirror adjustment switch was in the wrong position. You'd think I would read the owners manual after 8 years of driving LS's.