Notices
LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

95 auto window function not working

Old Apr 1, 2010 | 12:37 PM
  #1  
Suddog's Avatar
Suddog
Thread Starter
Driver School Candidate
 
Joined: Mar 2010
Posts: 16
Likes: 0
From: Guam
Default 95 auto window function not working

Hi fellow CL'ers,

My quest to find out why my auto window function does not work on my 95 ls4 is not going so well. The other windows will not rolll down with the drivers switch. I thought it was the switch, so I replaced it with another. Same problem exists. Is this a common problem with the switches or is there an ECU that needs fixing? All windows work on their own switch. They just can not be controlled by the driver control switch. Any Ideas?
Reply
Old Apr 1, 2010 | 01:18 PM
  #2  
PureDrifter's Avatar
PureDrifter
BahHumBug
CL Folding 100,000
20 Year Member
Photogenic
Liked
iTrader: (10)
 
Joined: Aug 2004
Posts: 23,920
Likes: 114
From: California
Default

driver's door ecu.
Reply
Old Apr 2, 2010 | 05:24 AM
  #3  
willhickey's Avatar
willhickey
Lexus Test Driver
iTrader: (1)
 
Joined: Feb 2009
Posts: 852
Likes: 0
From: north caroilina
Default

where is this drivers door ecu located puredrifter?
Reply
Old Apr 2, 2010 | 09:34 AM
  #4  
PureDrifter's Avatar
PureDrifter
BahHumBug
CL Folding 100,000
20 Year Member
Photogenic
Liked
iTrader: (10)
 
Joined: Aug 2004
Posts: 23,920
Likes: 114
From: California
Default

.....in the...driver's door
where else would it be?
Reply
Old Apr 2, 2010 | 09:52 AM
  #5  
AzHotLS's Avatar
AzHotLS
Pole Position
iTrader: (1)
 
Joined: Jan 2009
Posts: 309
Likes: 3
From: AZ
Default

in the driver's door, good one Mr. Obvious.

Diagram:

http://www. t o y o d i y .com/parts...KA_8401.8.html

(remove spaces from t o y o d i y)
Reply
Old Apr 2, 2010 | 10:32 AM
  #6  
PureDrifter's Avatar
PureDrifter
BahHumBug
CL Folding 100,000
20 Year Member
Photogenic
Liked
iTrader: (10)
 
Joined: Aug 2004
Posts: 23,920
Likes: 114
From: California
Default

Originally Posted by AzHotLS
in the driver's door, good one Mr. Obvious.

Diagram:

http://www. t o y o d i y .com/parts...KA_8401.8.html

(remove spaces from t o y o d i y)
well sorry for assuming it was obvious that you had to take the door panel off to see it
Reply
Old Apr 2, 2010 | 07:03 PM
  #7  
AzHotLS's Avatar
AzHotLS
Pole Position
iTrader: (1)
 
Joined: Jan 2009
Posts: 309
Likes: 3
From: AZ
Default

no, no, I'm on your side. I was being facetious. Sorry I wasn't obvious.
Reply
Old Apr 2, 2010 | 09:21 PM
  #8  
Suddog's Avatar
Suddog
Thread Starter
Driver School Candidate
 
Joined: Mar 2010
Posts: 16
Likes: 0
From: Guam
Default

Thanks for all the replies. I will check the door harness before I order the ecu. hopefully my rat enemy hasnt chewed through that harness as well. Never know with that guy. He has cost me well over $1000 in wiring issues. He made a nice nest under the intake manifold, chewed through the injector wire harness, pcv hose, ate the egr harness to include the connector, and also ate the left knock sensor connector and pigtail as well.
I hope that I have found all the damage and can drive this car.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mr177
ES - 1st to 6th Gen (1990-2018)
5
Sep 4, 2018 10:32 AM
Archi
RX - 1st Gen (1999-2003)
0
Apr 18, 2018 01:26 AM
Stereorob
LS - 1st and 2nd Gen (1990-2000)
6
Dec 11, 2015 05:47 PM
Woozy
LS - 1st and 2nd Gen (1990-2000)
1
Feb 24, 2011 07:37 AM
Nyteryder
SC - 1st Gen (1992-2000)
1
Mar 30, 2007 12:18 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 08:50 AM.