OK So Bought My 99 Gs300 Used Was Seller Bought At Auction No keys....So The Keys I Have Both Work In Ignition But Dont Work On Doors Or Trunk....has a viper alarm which my remotes are in serious need of replacing but for the money I could just replace alarm system with something newer...so next problem lost one of my viper remotes and second one battery died.....got the alarm of with valet switch but I don't want to always rely on the remote....can I get a key cut for my doors or can I get my keys programmed for the locks what are my options

 

If you have the key that has the remote lock/unlock buttons on them you can program them to work. The directions are posted on this forum.

 

I know but if that breaks still stuck with no way to get into the car....A key is a necessary fail safe

 

Local locksmith wanted 116.00 for a master key with no buttons. Sewell online will sell you one cut to your VIN and ready to go for around 70.00. Sounds like you only have a valet key. If you do not have a master key with buttons to program the new key, you will have to have locksmith or dealer program it for you at extra cost.

 

take the cylinders out, and have them coded to match your ignition key.

 

Now have a master key with the buttons but it doesn't turn the locks manually....and it needs a new battery is if it works though always used the viper remote....plus my master key button pad is extremely warn

 

Where could I have that done? And how much would that cost

 

any locksmith, recoding should probably run 20 a cylinder.

 

Sounds like fun...

 

Lol no shiz.....yay labor for me