This is where I bought mine.

https://www.aliexpress.com/w/wholesa...vci-2.0.4.html

 

It gives me a list. Do you wanna share the exact link/seller shop name (?) .
The above link has a mix of 1.xx and not seeing 2.0.4 with solid reviews

 

Sorry it has been 6 to 7 years ago and I don't remember the exact one I purchased. It works well.

 

Is thereyou guys who has china cloned MVCI device with firmware 2.0.4, can use following steps to read and dump 2.04 firmware to HEX file and share it on this post to those who bricked their china cloned MVCI device, and they want to restore the 2.04 firmware to fix their MVCI but can’t found it on WWW, thank you.

First down load FlashMagic.exe install file as below link:
https://www.flashmagictool.com/downl...FlashMagic.exe

The only HEX file I can found on WWW for MVCI was firmware 1.4.1 as below link:
https://drive.google.com/file/d/1CN7...ew?usp=sharing

Is thereyou guys who has china cloned MVCI device with firmware 2.0.4 who can use following steps to read and dump the 2.04 firmware to HEX file and share it on this post to those who bricked their china cloned MVCI device, and they want to restore the 2.04 firmware to fix their MVCI but can’t found it on WWW, thank you.

STEP 1: Down load and Install FlashMagic.exe to your computer.
STEP 2: Connect the MVCI device to an USB port.
STEP 3: Open FlashMagic, tap Change device to LPC2000/UART/LPC2119 in Device:
STEP 4: Select Serial Port: as your MVCI USB virtual COM# is. (COM3 ~ 9)
STEP 5: Select Baudrate: 38400 are just perfect.
STEP 6: Tap ISP/Read/Export Memory/Use specific address range.
STEP 7: Tap the button on the right/down corner, just on the top of [Close] button to start the HEX file dumping process, the button almost can’t be seen, that’s why the MVCI firmware 2.0.4 HEX file is lacking on the WWW, I think it’s a bug of FlashMagic.
STEP 8: Share and post the MVCI firmware 2.0.4 HEX file as you can, appreciate.

The sreen shoot how to start Export Memory of firmware 2.04 to HEX file:

Tap grey line button to start dumping HEX file

 

Is thereyou guys who has china cloned MVCI device with firmware 2.0.4 who can use following steps to read and dump the 2.04 firmware to HEX file and share it on this post to those who bricked their china cloned MVCI device, and they want to restore the 2.04 firmware to fix their MVCI but can’t found it on WWW, thank you.First down load FlashMagic.exe install file as below link:
https://www.flashmagictool.com/downl...FlashMagic.exe
STEP 1: Down load and Install FlashMagic.exe to your computer.
STEP 2: Connect the MVCI device to an USB port.
STEP 3: Open FlashMagic, tap Change device to LPC2000/UART/LPC2119 in Device:
STEP 4: Select Serial Port: as your MVCI USB virtual COM# is. (COM3 ~ 9)
STEP 5: Select Baudrate: 38400 are just perfect.
STEP 6: Tap ISP/Read/Export Memory/Use specific address range.
STEP 7: Tap the button on the right/down corner, just on the top of [Close] button to start the HEX file dumping process, the button almost can’t be seen, that’s why the MVCI firmware 2.0.4 HEX file is lacking on the WWW, I think it’s a bug of FlashMagic.
STEP 8: Share and post the MVCI firmware 2.0.4 HEX file as possible you can.

The screen shoot of Flashmagic to Export Memory to HEX file:

 

^
Depending on how much time I have this weekend I'll give it a shot and export the firmware.

-Nigel