When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Make sure you buy the plug ends at the very least. If you have not bought the stuff yet, try to get the whole dash harness. I think that makes it pretty much plug and play, but I am not positive on that.
Will the 98 harness that connects everything located behind the dash plug and play in say, a 95? If not then it would be easier to just rewire everything. You will need a 97+ cluster, its connectors, a wiring diagram for it, and knowledge of your own cluster. As far as I know, the 97+ clusters only have changeable bulbs in the alert or warning line, and the shift location section. Its CC lit everywhere else.
ill know in a couple days because quickgs is completing my swap as we speak. I have a 97+ dash harness and used a 97+ gauge cluster from what i am told by balconnell that everything should work like normal when it plugs up. So ill let you guys know in a couple days
Im pretty sure im going to have to do some cutting and splicing.
keep us informed man
Originally Posted by FUZION
ill know in a couple days because quickgs is completing my swap as we speak. I have a 97+ dash harness and used a 97+ gauge cluster from what i am told by balconnell that everything should work like normal when it plugs up. So ill let you guys know in a couple days
Thats kool I didnt know quickgs could do that for you take pics when you can..... I will be picking up my already done harness from sc25tt at the end of the week all I need is the cluster now
10-03-10, 04:30 PM
