deactivate the auto lock feature
Thread Starter
Driver School Candidate
Joined: Jul 2018
Posts: 21
Likes: 3
From: AB
deactivate the auto lock feature
This sound like the right method for an rx330 ?
- Put the key in the ignition and turn it to on.
- Press the Unlock button three times.
- Turn the ignition off.
- Press the Unlock button three more times.
- Turn the ignition back to on.
- The horn should beep once. This tells you that you’re now in programming mode.
- Press the Unlock button, then press Lock again. The horn will beep once to tell you that Auto Lock was deactivated. It will beep twice if you’re reactivating the system.
- Turn the ignition back to off and listen for the horn to beep one time confirming that the programming was accepted.
Thread Starter
Driver School Candidate
Joined: Jul 2018
Posts: 21
Likes: 3
From: AB
Thread
Thread Starter
Forum
Replies
Last Post
icyfreakas
IS - 2nd Gen (2006-2013)
43
Sep 26, 2009 12:51 PM
