Notices
Performance Forced induction, intakes, exhausts, torque converters, transmissions, etc.

IS200t tune

Thread Tools
 
Search this Thread
 
Old Oct 17, 2017 | 04:57 AM
  #1771  
Is200tnc's Avatar
Is200tnc
Driver
 
Joined: Mar 2017
Posts: 138
Likes: 26
From: NC
Default

Originally Posted by IS200TFOWL
Creating massive amounts of backfire. Like a shotgun is going off! Also a nice high pitch sspppt' from the bov. It hasn't caused any cel's either
video please
Reply
Old Oct 17, 2017 | 05:34 AM
  #1772  
daniellina's Avatar
daniellina
Pole Position
 
Joined: Jan 2017
Posts: 211
Likes: 46
From: Florida
Default

Originally Posted by Mariovar
I’m running an injen intake and invidia mid pipe, otherwise stock.. I found that the car ran .2 sec fast in auto vs using the paddles .. I too ran 40psi of tire pressure in my first run and experienced wheel hop. I dropped it to 32psi and I got better results.
Thats a pretty nice run for a car with few mods like yours i'm sure mine can get 9 flat with lower tire pressure and better reaction time, also lower temps i ran at 83 F second run and the line was pretty long like we all know our car its very sensitive to IAT. lets see what happens next time i'm gonna go earlier to see if i can get a few more runs!
Reply
Old Oct 17, 2017 | 10:41 AM
  #1773  
IS200TFOWL's Avatar
IS200TFOWL
Advanced
 
Joined: Jan 2017
Posts: 519
Likes: 93
From: az
Default

Originally Posted by Is200tnc
video please
definitely loud enough to catch a ticket. I'll have to be careful I already scared some couple walking down main st
Reply
Old Oct 17, 2017 | 04:34 PM
  #1774  
gbgary's Avatar
gbgary
Pole Position
 
Joined: Dec 2016
Posts: 336
Likes: 31
From: texas
Default

Originally Posted by Sheddy
Nice! With TTI stage 2 we are only 2 PSI over stock, so lets see what 2+ does.
BMS can be adjusted to +5 PSI. When i ran mine on the dyno i had it set on +4PSI, but that was on a bone stock motor.
as you know i've got your bms unit now. did you leave set at 4 when you sold it?
Reply
Old Oct 17, 2017 | 05:56 PM
  #1775  
Sheddy's Avatar
Sheddy
Thread Starter
Racer
 
Joined: Feb 2012
Posts: 1,729
Likes: 409
From: South FL
Default

Originally Posted by gbgary
as you know i've got your bms unit now. did you leave set at 4 when you sold it?
Yup, I had it set at 4psi. You can always connect the laptop and double check the boost failsafe setting.

Last edited by Sheddy; Oct 18, 2017 at 06:57 AM.
Reply
Old Oct 18, 2017 | 01:15 AM
  #1776  
IS200TFOWL's Avatar
IS200TFOWL
Advanced
 
Joined: Jan 2017
Posts: 519
Likes: 93
From: az
Default

PPE catted downpipe straight pipe. Security flew around the corner lol
Reply
Old Oct 18, 2017 | 04:39 AM
  #1777  
daniellina's Avatar
daniellina
Pole Position
 
Joined: Jan 2017
Posts: 211
Likes: 46
From: Florida
Default

Originally Posted by IS200TFOWL
PPE catted downpipe straight pipe. Security flew around the corner lol
Sounds kind of like mine when i had the de catted downpipe and straight pipe idk if yours drones but i got tired of it plus its a lexus so you dont want it to sound too loud or graspy. Thats why i got the circuit werks axleback from 1 to 10 in loudness i would say my car now its a 7.5 sounds good and it feels better. you should have at least a couple small mufflers.
Reply
Old Oct 18, 2017 | 07:27 AM
  #1778  
Sheddy's Avatar
Sheddy
Thread Starter
Racer
 
Joined: Feb 2012
Posts: 1,729
Likes: 409
From: South FL
Default

lol I'll keep my stock quiet exhaust, but do miss the way an aftermarket exhaust looked.

Tanabe Medallion LEFT F Sport RIGHT
Reply
Old Oct 18, 2017 | 07:42 AM
  #1779  
daniellina's Avatar
daniellina
Pole Position
 
Joined: Jan 2017
Posts: 211
Likes: 46
From: Florida
Default

Originally Posted by Sheddy
lol I'll keep my stock quiet exhaust, but do miss the way an aftermarket exhaust looked.

Tanabe Medallion LEFT F Sport RIGHT
The Fsport one looks too good
Reply
Old Oct 18, 2017 | 09:32 AM
  #1780  
Sheddy's Avatar
Sheddy
Thread Starter
Racer
 
Joined: Feb 2012
Posts: 1,729
Likes: 409
From: South FL
Default

Supercharged IS350 results
At least i'm making more WTQ than this stock IS350 with the Stage 2 and down pipe.
Reply
Old Oct 18, 2017 | 11:11 AM
  #1781  
IS200TFOWL's Avatar
IS200TFOWL
Advanced
 
Joined: Jan 2017
Posts: 519
Likes: 93
From: az
Default

Originally Posted by daniellina
Sounds kind of like mine when i had the de catted downpipe and straight pipe idk if yours drones but i got tired of it plus its a lexus so you dont want it to sound too loud or graspy. Thats why i got the circuit werks axleback from 1 to 10 in loudness i would say my car now its a 7.5 sounds good and it feels better. you should have at least a couple small mufflers.
Yeah, no I like the backfire sound and I'm not the only one. I see straight piped everything out here i think its more of a difference of opinion. Either way Idk if you remember but i installed a valved exhaust so i can switch from oem to straight pipe. Also technically the only way to get that kind of backfire is by installing a bov after the stock bov or by completely replacing the stock bov. basically the same as the wrx sti

Last edited by IS200TFOWL; Oct 18, 2017 at 11:25 AM.
Reply
Old Oct 19, 2017 | 08:04 PM
  #1782  
Sheddy's Avatar
Sheddy
Thread Starter
Racer
 
Joined: Feb 2012
Posts: 1,729
Likes: 409
From: South FL
Default

Got confirmation that the AFE Scorcher piggyback system in the “Race mode” setting is +4 PSI over stock! If you guys sign up for their newsletter you can also get 10% off making it around $377 shipped. If you add a downpipe with this piggyback system you will see some awesome gains. I posted the link and information on the first page of this thread.
Reply
Old Oct 19, 2017 | 10:37 PM
  #1783  
IS200TFOWL's Avatar
IS200TFOWL
Advanced
 
Joined: Jan 2017
Posts: 519
Likes: 93
From: az
Default

Originally Posted by Sheddy
Got confirmation that the AFE Scorcher piggyback system in the “Race mode” setting is +4 PSI over stock! If you guys sign up for their newsletter you can also get 10% off making it around $377 shipped. If you add a downpipe with this piggyback system you will see some awesome gains. I posted the link and information on the first page of this thread.


I wonder if the dyno was only 2.5psi
Reply
Old Oct 19, 2017 | 10:39 PM
  #1784  
IS200TFOWL's Avatar
IS200TFOWL
Advanced
 
Joined: Jan 2017
Posts: 519
Likes: 93
From: az
Default

Reply
Old Oct 20, 2017 | 04:01 AM
  #1785  
Sheddy's Avatar
Sheddy
Thread Starter
Racer
 
Joined: Feb 2012
Posts: 1,729
Likes: 409
From: South FL
Default


Interesting, guess ill have to contact them again to verify.
Reply



All times are GMT -7. The time now is 10:08 AM.