When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2024 NX 350h premium, and I saw that I have the plug for the front grill camera.
Is there an option to fit the front grill camera to the current grill?
I found this exploded (section 1)view and was wondering if I get the front assembly and cover, will it work with the 14" infotainment system
Last edited by gallico916; May 15, 2024 at 10:13 AM.
I can't say for certain, but I suspect its not as easy as just plugging in a new camera. The 360 camera view system not only integrates front, side, and rear cameras (and the inside button) but also requires the software to be enabled to accept input from the cameras (combined with sensor readings from the parking and radar sensors) to be able to build (stitch together) the 360 view along with all the visual markups that are overlayed on the camera images. I'm going to be pessimistic that simply plugging in 1 front camera would suddenly bring just this one part of the full feature set to life no questions asked. Enabling the software feature is probably going to be the challenge for this and my gut says Lexus isn't going to make this easy.
Sometimes it is more effective for the car vendor, Lexus in this case, to pre-install a complete wiring harness instead of try to make separate partial wiring harnesses. Check to see if you have power on the harness and whether or not it is switched power. You can install camera if you have power. However, if switched power, then hard to set up as a security /theft camera