Notices
Lighting A place to ask questions about HIDs & other Lexus lights
Sponsored by:
Sponsored by: CARiD

HID foglight issue

Thread Tools
 
Search this Thread
 
Old Jul 16, 2011 | 11:59 AM
  #1  
Bigrahizzl's Avatar
Bigrahizzl
Thread Starter
Lexus Champion
iTrader: (8)
 
Joined: Apr 2007
Posts: 2,673
Likes: 0
From: N. VA
Default HID foglight issue

Installed the HID fogs last weekend and its seems that im having a problem. JUst now i went out and started the car and saw that my fogs didnt turn on. I went inside and checked if it was off but it wasnt. I switched the fog light to off and then on and it turned on. So when i came back home i shut off the car and decided to see if it does again. I started the car and again it didnt turn on.

Am i supposed to wait for it to turn on or something??? Do u guys know what might have gone wrong.

I just checked again and it comes on if i turn the accessory on but when i start the car it doesnt

Btw, i got the Volt 6000k from Xenondepot
Reply
Old Jul 16, 2011 | 04:31 PM
  #2  
Bigrahizzl's Avatar
Bigrahizzl
Thread Starter
Lexus Champion
iTrader: (8)
 
Joined: Apr 2007
Posts: 2,673
Likes: 0
From: N. VA
Default

Anyone?????
Reply
Old Jul 17, 2011 | 01:34 AM
  #3  
j three's Avatar
j three
Lexus Test Driver
20 Year Member
 
Joined: Jul 2004
Posts: 861
Likes: 0
From: California
Default

Just keep the fog switch to on and turn off the main light switch when exiting. Then when entering just turn the main light switch to on and low and fogs will both turn on. Kinda sucks but it works for me. I think the problem is that the car startup uses a lot of power and so does igniting xenon. The starting motor takes all of the power.
Reply
Old Jul 17, 2011 | 08:55 AM
  #4  
Bigrahizzl's Avatar
Bigrahizzl
Thread Starter
Lexus Champion
iTrader: (8)
 
Joined: Apr 2007
Posts: 2,673
Likes: 0
From: N. VA
Default

Hmmm that's strange, do I need a relay?
Reply
Old Jul 18, 2011 | 01:18 PM
  #5  
is350memb's Avatar
is350memb
Driver
 
Joined: Feb 2011
Posts: 157
Likes: 0
From: ca
Default

check your connection. where did u tap into the wire? Relay is a plus but not necessary.
Reply
Old Jul 18, 2011 | 02:55 PM
  #6  
Bigrahizzl's Avatar
Bigrahizzl
Thread Starter
Lexus Champion
iTrader: (8)
 
Joined: Apr 2007
Posts: 2,673
Likes: 0
From: N. VA
Default

^^^ i didnt tap any wires, the kit is just plug and play, only had to reverse the polarity
Reply
Old Jul 27, 2011 | 08:10 PM
  #7  
1sWt2GS's Avatar
1sWt2GS
Lexus Test Driver
iTrader: (6)
 
Joined: Dec 2010
Posts: 6,509
Likes: 27
From: soCAL
Default

i was going to tell you to reverse the polarity, but you already tried it

a few of my IS friends also had this probleming with a flickering bulb or a bulb that wouldnt come on that needed to be turned on and off a few times for it to go away.
Reply
Old Jul 28, 2011 | 01:00 AM
  #8  
Bigrahizzl's Avatar
Bigrahizzl
Thread Starter
Lexus Champion
iTrader: (8)
 
Joined: Apr 2007
Posts: 2,673
Likes: 0
From: N. VA
Default

I ordered a relay for the kit. Will see this weekend if it works or not
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bigrahizzl
IS - 2nd Gen (2006-2013)
47
Jul 26, 2012 08:08 AM
Avarec
IS - 1st Gen (2001-2005)
9
Jan 2, 2011 12:49 PM
w1ck3d64
IS - 2nd Gen (2006-2013)
4
Aug 5, 2008 06:40 PM
MoreMGD32
ES - 1st to 6th Gen (1990-2018)
4
Mar 8, 2007 01:52 PM
ABC
IS - 2nd Gen (2006-2013)
23
Nov 17, 2006 05:42 AM




All times are GMT -7. The time now is 10:38 PM.