HIDEXTRA.com HID Review
i need to order a set of h3 6k for 97 sc300
does your plug mate to oem power plug for lexus sc 300 on my last set i had to hack off the plugs and hard wire for fogs
does anyone have a picture of actual plug from this kit for h3 kit so i can see if same is required on this kit
does your plug mate to oem power plug for lexus sc 300 on my last set i had to hack off the plugs and hard wire for fogs
does anyone have a picture of actual plug from this kit for h3 kit so i can see if same is required on this kit
HI,
our kit is direct plug and play with either male/female plug or wire harness that has metal prong that can be plugged in directly into your oem connector. Thanks~
michelle
our kit is direct plug and play with either male/female plug or wire harness that has metal prong that can be plugged in directly into your oem connector. Thanks~
michelle
i need to order a set of h3 6k for 97 sc300
does your plug mate to oem power plug for lexus sc 300 on my last set i had to hack off the plugs and hard wire for fogs
does anyone have a picture of actual plug from this kit for h3 kit so i can see if same is required on this kit
does your plug mate to oem power plug for lexus sc 300 on my last set i had to hack off the plugs and hard wire for fogs
does anyone have a picture of actual plug from this kit for h3 kit so i can see if same is required on this kit
i still have the oem connector plug that i chopped off to hard prior kit , i can reattach it but before i do this i wanna make sure it will mate to your connector
the oem connector plugged into the back of the oem fog housing .. with hid you dont use that sorce anymore for the wires come thru the back of the housing to connect to hid connectors so exactly how doe that same plug mate to yours
HI,
We do apologize but we don't have pictures of our parts since some wire harnesses from one kit to another looks differently. Thanks~
michelle
We do apologize but we don't have pictures of our parts since some wire harnesses from one kit to another looks differently. Thanks~
michelle
can you post a quick pic of the actual connector which is the power source
i still have the oem connector plug that i chopped off to hard prior kit , i can reattach it but before i do this i wanna make sure it will mate to your connector
the oem connector plugged into the back of the oem fog housing .. with hid you dont use that sorce anymore for the wires come thru the back of the housing to connect to hid connectors so exactly how doe that same plug mate to yours
i still have the oem connector plug that i chopped off to hard prior kit , i can reattach it but before i do this i wanna make sure it will mate to your connector
the oem connector plugged into the back of the oem fog housing .. with hid you dont use that sorce anymore for the wires come thru the back of the housing to connect to hid connectors so exactly how doe that same plug mate to yours
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
I think I have the same question as lexforlife... Do the positive/negative wires coming from your HID H3 bulb plug into the factory leads on the circular black housing cover and then the wires on the ballast plug into the other side of that circular black housing cover (like the factory halogens)? Or would your HID H3 bulb plug directly into the ballast and then we would have to cut/drill into the factory circular black housing cover? Attached are a couple of picture of the 97+ SC foglight housing (from neurocity's DIY):
Last edited by potatoBBQ; Mar 1, 2010 at 03:49 AM.
I think I have the same question as lexforlife... Do the positive/negative wires coming from your HID H3 bulb plug into the factory leads on the circular black housing cover and then the wires on the ballast plug into the other side of that circular black housing cover (like the factory halogens)? Or would your HID H3 bulb plug directly into the ballast and then we would have to cut/drill into the factory circular black housing cover? Attached are a couple of picture of the 97+ SC foglight housing (from neurocity's DIY):
Hi,
Does your car come with stock HID or stock halogen? Since you didn't specify see below for ordering instructions
Ordering Instructions:
1.) Go to this link to check on bulb type
http://www.sylvania.com/ConsumerProd...lacementGuide/
2.) Then go to www.hidextra.com and choose the (BULB TYPE AND COLOR)
3.) Use Express checkout
4.) Input coupon code: springsp-m to get $17 off the kit price
Input coupon code: tenpercentoff-m to get 10% off bulbs only, ballast or accessories
5.) IF you are purchasing more than one kit, please do SEPARATE transactions for EACH kit in order to get discount on all kits.
Thanks~
Michelle
Does your car come with stock HID or stock halogen? Since you didn't specify see below for ordering instructions
Ordering Instructions:
1.) Go to this link to check on bulb type
http://www.sylvania.com/ConsumerProd...lacementGuide/
2.) Then go to www.hidextra.com and choose the (BULB TYPE AND COLOR)
3.) Use Express checkout
4.) Input coupon code: springsp-m to get $17 off the kit price
Input coupon code: tenpercentoff-m to get 10% off bulbs only, ballast or accessories
5.) IF you are purchasing more than one kit, please do SEPARATE transactions for EACH kit in order to get discount on all kits.
Thanks~
Michelle
HI,
In your case, the prongs come from wire harness.
so
bulbs --> ballast --> Wire harness --> Oem connector
And you would need to drill a hole in your housing cover or not use the cover at all. thanks~
Michelle
In your case, the prongs come from wire harness.
so
bulbs --> ballast --> Wire harness --> Oem connector
And you would need to drill a hole in your housing cover or not use the cover at all. thanks~
Michelle
I think I have the same question as lexforlife... Do the positive/negative wires coming from your HID H3 bulb plug into the factory leads on the circular black housing cover and then the wires on the ballast plug into the other side of that circular black housing cover (like the factory halogens)? Or would your HID H3 bulb plug directly into the ballast and then we would have to cut/drill into the factory circular black housing cover? Attached are a couple of picture of the 97+ SC foglight housing (from neurocity's DIY):