When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I don't normally do a warm up procedure with the car. Just take it slow until the oil temperature gets to ideal level, that's when you see the 3 bars on the display.
well, i am on freeway alot. And it takes forever to get to the 3rd bar. Its like 1 mile away from freeway entrance so i really cant go slow until it hits 3rd bar. Even then im on freeway, i have to be on freeway going 65 for like 5 mins for the 3rd bar to show
It's really about the water temp. If the jackets reaches operating temp., you should be fine to do whatever you want. Oil does not have to be hot...just flowing of course.
i always warm the engine to get the bars up to 3 or i feel its ok to give it a go. i was told the engine seals should be warm etc before full throttle to have better wear. but thats what i have heard.
Ive read a bunch on this topic and i pretty much agree with a few methods
my most used is the same as evil teo
if u wait long enough, I find depending on temp, ur car will change its sound as it drops to 1
Its almost as if the beast is saying shes ready
the ready sound as I call it.
but if u dont want ur friends to tease u because u make them wait for the sound
i also believe in driving it easy until its warm to 3 bars oil temp
just dont rip on her and ull be fine