04 GX470 hood shocks replacement
https://www.clublexus.com/forums/gx-...placments.html
2 are cheaper than 1 OEM and the aftermarket ones are 10000000x better than the stock hood struts....
2 are cheaper than 1 OEM and the aftermarket ones are 10000000x better than the stock hood struts....
https://www.clublexus.com/forums/gx-...placments.html
2 are cheaper than 1 OEM and the aftermarket ones are 10000000x better than the stock hood struts....
2 are cheaper than 1 OEM and the aftermarket ones are 10000000x better than the stock hood struts....
Trending Topics
I replaced my struts with Strong Arm 6228 struts, my experience with this brand on both the GX470 and 4runner has been positive. The Strong Arm struts come with the replacement ball screw and conical washer, the conical washer base is against the vehicle and the top of the cone is against the screw. The 2008 GX470 service manual has the ball screws at 13ft-lbs or 156in-lb, if you have a deep socket and a torque wrench you can get these tightened perfectly. After the ball screws are installed, the struts just snap into place, I installed mine to the engine bay first, then turned the strut body 90 degrees clockwise (per the instructions) and snapped them into the hood. Note, you will have to lift your hood a little bit to get the alignment just right to snap them in.
Thread
Thread Starter
Forum
Replies
Last Post






