Mingofish Atlanta RCF build
Pole Position
Joined: Oct 2016
Posts: 310
Likes: 19
From: TX
Lead Lap
Joined: May 2016
Posts: 407
Likes: 28
From: California
Pole Position
Joined: Oct 2016
Posts: 310
Likes: 19
From: TX
Thread Starter
Lexus Test Driver
Joined: Jul 2016
Posts: 870
Likes: 333
From: Ga
Hey guys,
sorry slow to respond.
Here's a link to amazon for the courtesy lights.
https://www.amazon.com/gp/aw/d/B015M...236_SY340_QL65
I said in a previous reply I paid $28. But I checked my amazon purchase history and this is what I bought. $16.99
Not sure if it's different than the ones for $28
Just to confirm, RCF & RC350/250 lights are all the same.
sorry slow to respond.
Here's a link to amazon for the courtesy lights.
https://www.amazon.com/gp/aw/d/B015M...236_SY340_QL65
I said in a previous reply I paid $28. But I checked my amazon purchase history and this is what I bought. $16.99
Not sure if it's different than the ones for $28
Just to confirm, RCF & RC350/250 lights are all the same.
Thread Starter
Lexus Test Driver
Joined: Jul 2016
Posts: 870
Likes: 333
From: Ga
Well I got a bummer call today. My carbon fiber hood had complications during production. Guess now I gotta wait a lil' more. But at least they notified me immediately. Good customer relations !! Big props for JL Composites!
But then I got a FedEx tracking from RR. They sent out my coilovers today!
Guess one offsets the other...
Also ordered this today. Gonna look sweet along with my custom DCTMS steering wheel. Can't wait!
http://www.bulletproofautomotive.com...***-carbon-red
oh yeah, got my Jdm rear fender molding today from Luke/group buy too. Sweet!
This october Xmas has been good so far!!
But then I got a FedEx tracking from RR. They sent out my coilovers today!
Guess one offsets the other...
Also ordered this today. Gonna look sweet along with my custom DCTMS steering wheel. Can't wait!
http://www.bulletproofautomotive.com...***-carbon-red
oh yeah, got my Jdm rear fender molding today from Luke/group buy too. Sweet!
This october Xmas has been good so far!!
Last edited by Mingofish; Oct 26, 2016 at 10:12 PM.
Thread Starter
Lexus Test Driver
Joined: Jul 2016
Posts: 870
Likes: 333
From: Ga
Well I finally finished the calipers today.
Ended up with silver base powder coat, polished flat front area with 2 tone brembo logo, then gloss clear powder coat.
Will try to install next few days along w the RR griodisk rotors & endless pads.
What do y'all think? Was gonna do all red logo. Ended up with white & red.
Ended up with silver base powder coat, polished flat front area with 2 tone brembo logo, then gloss clear powder coat.
Will try to install next few days along w the RR griodisk rotors & endless pads.
What do y'all think? Was gonna do all red logo. Ended up with white & red.
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
Advanced
Joined: Jan 2016
Posts: 604
Likes: 75
From: CA
Pole Position
Joined: Oct 2016
Posts: 310
Likes: 19
From: TX
If anyone likes these courtesy lights here is the link: https://www.amazon.com/Wind-Fire-D00...TF8&Make=Lexus 75&Model=RC350 24250&Year=2015 2015&ie=UTF8&n=15684181&newVehicle=1&s=automotive&vehicleId=1&vehicleType=automotive&tag=viglink20326-20
Comes with free lifetime logo chip replacement!
For more pictues check out the thread: https://www.clublexus.com/forums/rc-...stalled-2.html
Advanced
Joined: Dec 2014
Posts: 725
Likes: 214
From: Fl
My courtesy lights came in yesterday from Amazon, thanks for letting us know about these. Enjoying your build. Do you belong to Club Lexotic in Atlanta? I'll be up in Alpharetta in a few weeks getting my Sikky headers installed on my RCF at Topspeed Motorsports, we should get up for a few photos and some grub!
Thread Starter
Lexus Test Driver
Joined: Jul 2016
Posts: 870
Likes: 333
From: Ga
My courtesy lights came in yesterday from Amazon, thanks for letting us know about these. Enjoying your build. Do you belong to Club Lexotic in Atlanta? I'll be up in Alpharetta in a few weeks getting my Sikky headers installed on my RCF at Topspeed Motorsports, we should get up for a few photos and some grub!
Y'all actually been buying a different version of the courtesy light than ones I got.
Mine were $17 but don't have the life time lense warranty.
I actually think they're the same product, just packaged & sold differently.
No I'm not part of Lexotic. The guy that started the club is actually part owner of the company that's making my carbon fiber hood. I've never met him though.
Dont think there's much going on with that club. Could be wrong tho.
When are are you coming to Alpharetta? I live in canton but travel to Alpharetta few days a week.
Going to Savannah for HPDE at Robeling 11/10-11/12. Hope it's not around then.
I'll send you a pm tomorrow to work that out.
Would love to see your car and shake your hand. Looking forward to seeing all that alcantara custom work!
Last edited by Mingofish; Nov 1, 2016 at 09:47 PM.
Well I got a bummer call today. My carbon fiber hood had complications during production. Guess now I gotta wait a lil' more. But at least they notified me immediately. Good customer relations !! Big props for JL Composites!
But then I got a FedEx tracking from RR. They sent out my coilovers today!
Guess one offsets the other...
Also ordered this today. Gonna look sweet along with my custom DCTMS steering wheel. Can't wait!
http://www.bulletproofautomotive.com...***-carbon-red
oh yeah, got my Jdm rear fender molding today from Luke/group buy too. Sweet!
This october Xmas has been good so far!!
But then I got a FedEx tracking from RR. They sent out my coilovers today!
Guess one offsets the other...
Also ordered this today. Gonna look sweet along with my custom DCTMS steering wheel. Can't wait!
http://www.bulletproofautomotive.com...***-carbon-red
oh yeah, got my Jdm rear fender molding today from Luke/group buy too. Sweet!
This october Xmas has been good so far!!
Thread Starter
Lexus Test Driver
Joined: Jul 2016
Posts: 870
Likes: 333
From: Ga
I will tell you that it was sorta a steep learning curve initially.
Had to figure out how to work the film & heat it & trim it so there's no bubbles or sloppy edges.
Recommend getting 3x more than what you think you need.
Stuff isn't expensive which helps.