Aristo swap into 98/99 gs300. Did not come with the jumper caps. Please xplain rewire
#1
Rookie
Thread Starter
Aristo swap into 98/99 gs300. Did not come with the jumper caps. Please xplain rewire
Info: 1998/99 GS300, 2jzgte vvti aristo motor, trans, ecu, harness, ignitor, maf. Did not come with
the jumper terminal caps for the shift lock and lights fix
Whats up guys. It has been asked about in threads, but no diagrams have been showed, maybe I overlooked it?
i use the search and search this forum tab, but my keywords are not bringing up results.
I know it is mentioned in most the build threads, but no one posts diagrams or info regarding the correct pin terminals, and writeup of where everything goes.
ive gone through burgundygs build thread, adamgamz, sbm2jlex (which had the info in there and the pics from silvrgs300 but doesnt have a write up and correct pin out locations. I seen 1jznando asked a few times as well as others. And for some reason its not showing the pic posted on my new lap top, or on my iphone???) and bunch of other threads.
Any help is greatly appreciated.
the jumper terminal caps for the shift lock and lights fix
Whats up guys. It has been asked about in threads, but no diagrams have been showed, maybe I overlooked it?
i use the search and search this forum tab, but my keywords are not bringing up results.
I know it is mentioned in most the build threads, but no one posts diagrams or info regarding the correct pin terminals, and writeup of where everything goes.
ive gone through burgundygs build thread, adamgamz, sbm2jlex (which had the info in there and the pics from silvrgs300 but doesnt have a write up and correct pin out locations. I seen 1jznando asked a few times as well as others. And for some reason its not showing the pic posted on my new lap top, or on my iphone???) and bunch of other threads.
Any help is greatly appreciated.
Last edited by 4rcedfed; 10-15-13 at 09:05 PM.
#4
I don't know if this will help you at all, but here's a link with the Aristo's pinouts: http://wilbo666.pbworks.com/w/page/4...ngine%20Wiring
Hopefully you can find a link with the domestic GS300 wiring diagram. Good luck!
Hopefully you can find a link with the domestic GS300 wiring diagram. Good luck!
The following users liked this post:
4rcedfed (08-27-19)
#5
Rookie
Thread Starter
Thank you very much!! I did see that diagram, and I will cross referance as soon as I get a good diagram for the u.s. harness. I just figured if someone already has done it they could post it. Thanks again!
#6
These are a few threads I found for wiring on a US GS300 for the swap. Maybe the ECU pin out can help. Where in California are you located?
https://www.clublexus.com/forums/per...-pinout-2.html
https://www.clublexus.com/forums/per...e-answers.html
https://www.clublexus.com/forums/per...isto-swap.html
https://www.clublexus.com/forums/per...-pinout-2.html
https://www.clublexus.com/forums/per...e-answers.html
https://www.clublexus.com/forums/per...isto-swap.html
The following users liked this post:
4rcedfed (04-13-19)
#7
Rookie
Thread Starter
Hey thanks brother!! San Diego how about you?. Ive had the swap and have been collecting parts and info for a while. Im still in the military so its hard to get time off I keep getting month long orders for random training. But once I get a good weekend im going to swap it all. Its sort of my daily driver thats why I have been lagging on getting it done.
Trending Topics
#8
No problem, I'm in the SD area as well. I hear you on lagging with projects haha. I'm in the same boat and need to start getting some things done first before I tackle the big jobs. I've been chasing a clunk in the front suspension of my wife's GS for the past 3 months. Hopefully a new control arm #2 will fix it and keep the floorboard from rattling every time it goes up an incline.
Anyway, looking forward to seeing your swap progress once you get some down time.
Anyway, looking forward to seeing your swap progress once you get some down time.
The following users liked this post:
4rcedfed (04-13-19)
#10
Lead Lap
iTrader: (3)
I don't know if this will help you at all, but here's a link with the Aristo's pinouts: http://wilbo666.pbworks.com/w/page/4...ngine%20Wiring
Hopefully you can find a link with the domestic GS300 wiring diagram. Good luck!
Hopefully you can find a link with the domestic GS300 wiring diagram. Good luck!
The following users liked this post:
4rcedfed (04-13-19)
#11
I agree, that site is one of the best for laying out wiring. I will need to use that site shortly to do some checks of wiring soon too. To the OP, let me know if you want to check out my wife's GS for reference.
The following users liked this post:
4rcedfed (04-13-19)
Thread
Thread Starter
Forum
Replies
Last Post