ClubLexus - Lexus Forum Discussion
0 2015/07/14 13:06:30
Koni shock bump stop I am using instead of BC racing bump stop. This bump stop is less progressive. It is way more softer than the stock BC racing bump stops. it has a 14mm diameter center hole. the stock BC racing shaft is 12mm diameter. I consider this a nice upgrade. part number is 7234480000 .
Koni shock bump stop I am using instead of BC racing bump stop. This bump stop is less progressive. It is way more softer than the stock BC racing bump stops. it has a 14mm diameter center hole. the stock BC racing shaft is 12mm diameter. I consider this a nice upgrade. part number is 7234480000 .
0 2015/07/14 13:03:30
Speed bleeders for supra/LS400 4-pot calipers(big brake upgrade), and stock GS300/SC300 calipers(front or rear ...are the same)
Speed bleeders for supra/LS400 4-pot calipers(big brake upgrade), and stock GS300/SC300 calipers(front or rear ...are the same)
0 2015/07/12 01:02:04
Bilstein Digressive Valving Guide
Bilstein Digressive Valving Guide
0 2015/07/11 10:53:27
Bilstein Linear Valving guide
Bilstein Linear Valving guide
0 2015/07/11 10:52:49
0 2015/07/08 07:12:00
0 2015/07/08 07:11:48
driver side trim bottom corner with rubber seal in bottom of pic. No cracks.
driver side trim bottom corner with rubber seal in bottom of pic. No cracks.
0 2015/06/20 11:14:25
driver side trim, front corner
driver side trim, front corner
0 2015/06/20 11:13:48
lower corner of driver side trim. no cracks.
lower corner of driver side trim. no cracks.
0 2015/06/20 11:11:02
top corners of trim. driver side is on the right of picture.
top corners of trim. driver side is on the right of picture.
0 2015/06/20 11:08:26
0 2015/06/20 11:08:12
chipped mounting points (right under the cars front grill)
chipped mounting points (right under the cars front grill)
0 2015/05/31 16:58:28
driver side closer look
driver side closer look
0 2015/05/31 16:57:46
driver side cracked bottom bend of lense
driver side cracked bottom bend of lense
0 2015/05/31 16:57:25
0 2015/05/31 16:55:25
driver side, cracked bottom.
driver side, cracked bottom.
0 2015/05/31 16:54:23
driver side is on the right of pic...see the cracked bottom.
driver side is on the right of pic...see the cracked bottom.
0 2015/05/31 16:53:47
driver side, top corner that needs a little sanding and repaint
driver side, top corner that needs a little sanding and repaint
0 2015/05/31 14:51:17
driver side, side-mirror area could you use a little buff.
driver side, side-mirror area could you use a little buff.
0 2015/05/31 14:50:40
0 2015/05/31 14:49:46
0 2015/05/20 11:05:59
0 2015/05/20 11:04:51
Summit Racing® Chrome Fuel Filters SUM-G1512 http://www.summitracing.com/parts/sum-g1512/overview/
Summit Racing® Chrome Fuel Filters SUM-G1512 http://www.summitracing.com/parts/sum-g1512/overview/
0 2015/05/20 10:59:35
47 Ohm resistor used.
47 Ohm resistor used.
0 2015/04/03 23:38:10
47 Ohm resistor used. For final, resistor use a 1/8 watt resistor.
47 Ohm resistor used. For final, resistor use a 1/8 watt resistor.
0 2015/04/03 23:35:17
brightness with 47 Ohm resistor.
brightness with 47 Ohm resistor.
0 2015/04/03 23:33:48
470 Ohm 1/2 watt resistor used during testing. If you are happy with the brightness/intensity, I would recommend using a 470 Ohm 1/8 watt resistor. It is very small and can fit in the needle.
470 Ohm 1/2 watt resistor used during testing. If you are happy with the brightness/intensity, I would recommend using a 470 Ohm 1/8 watt resistor. It is very small and can fit in the needle.
0 2015/04/03 23:28:25
Underside view of the needle. 2 SMD leds in the tip, and 2 smd leds at the base.
Underside view of the needle. 2 SMD leds in the tip, and 2 smd leds at the base.
0 2015/04/03 23:14:44
Fiber optic method UNDERSIDE VIEW - 2 SMD Led's installed in the tip of the needle, and another 2 SMD Led's installed in the base.
Fiber optic method UNDERSIDE VIEW - 2 SMD Led's installed in the tip of the needle, and another 2 SMD Led's installed in the base.
0 2015/04/03 23:10:23
Fiber optic method FRONT SIDE VIEW - 2 SMD Led's installed in the tip of the needle, and another 2 SMD Led's installed in the base.
Fiber optic method FRONT SIDE VIEW - 2 SMD Led's installed in the tip of the needle, and another 2 SMD Led's installed in the base.
0 2015/04/03 23:08:02
fiber optic method - 2 SMD Led's installed in the tip of the needle.
fiber optic method - 2 SMD Led's installed in the tip of the needle.
0 2015/04/03 23:06:35
Click this button icon to add/upload pictures directly to the forum/website server.
Click this button icon to add/upload pictures directly to the forum/website server.
0 2015/03/22 20:16:16
91-97 Aristo/ GS300 climate control unit
91-97 Aristo/ GS300 climate control unit
0 2015/03/22 18:08:53
91-97 Aristo/ GS300 climate control unit
91-97 Aristo/ GS300 climate control unit
0 2015/03/22 18:08:32
0 2015/03/22 14:26:35
0 2015/03/22 14:08:58
0 2015/03/22 14:08:28
0 2015/03/22 14:07:57
0 2015/03/22 14:07:37