When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's pretty impressive knowing they're making this power on 2.5 psi over stock. Also kinda disappointed they didn't take it a step further.
is the turbo muffler free flowing? Anyone mind pitching in?
Nice! With TTI stage 2 we are only 2 PSI over stock, so lets see what 2+ does.
BMS can be adjusted to +5 PSI. When i ran mine on the dyno i had it set on +4PSI, but that was on a bone stock motor.
Here’s my time slip at the 1/8 I was on the left lane vs a G8. I did get to see a 2nd gen 350.. he ran a 8.8 😒 didn’t see his mph .. I was too shocked by his time lol
Last edited by Mariovar; Oct 16, 2017 at 04:11 PM.
Here’s my time slip at the 1/8 I was on the left lane vs a G8. I did get to see a 2nd gen 350.. he ran a 8.8 😒 didn’t see his mph .. I was too shocked by his time lol
Thats a pretty good time what mods do you have? and i forgot to say but last time i put tires i didnt notice and my tire pressure was at 40 psi.. so for sure with 35 i can gain a litte more traction off the line.
Thats a pretty good time what mods do you have? and i forgot to say but last time i put tires i didnt notice and my tire pressure was at 40 psi.. so for sure with 35 i can gain a litte more traction off the line.
I’m running an injen intake and invidia mid pipe, otherwise stock.. I found that the car ran .2 sec fast in auto vs using the paddles .. I too ran 40psi of tire pressure in my first run and experienced wheel hop. I dropped it to 32psi and I got better results.
I contacted afe about their scorcher piggyback. They said if you ask it can be tuned to 4 psi over stock on race mode instead of 2.5
Custom bov. Still tuning the sound!
Wires galore! Lol
Thats awesome to know about the AFE Scorcher! We need someone to get a dyno done with a piggyback and down pipe because if I made 278wtq with the BMS on a bone stock motor then it should be a lot more than that with the down pipe!
I’m running an injen intake and invidia mid pipe, otherwise stock.. I found that the car ran .2 sec fast in auto vs using the paddles .. I too ran 40psi of tire pressure in my first run and experienced wheel hop. I dropped it to 32psi and I got better results.
Thats a pretty nice run for a car with few mods like yours i'm sure mine can get 9 flat with lower tire pressure and better reaction time, also lower temps i ran at 83 F second run and the line was pretty long like we all know our car its very sensitive to IAT. lets see what happens next time i'm gonna go earlier to see if i can get a few more runs!
Toyota and Lexus Join Mille Miglia For The First Time
Slideshow: A five-car lineup spanning more than five decades of Toyota performance and engineering will tackle one of Italy's most celebrated automotive routes.
