spring compressors for coilover install?

Reply Subscribe

Thread Tools

Search this Thread

Jul 2, 2012 | 09:51 PM

jschru

Thread Starter

Driver

iTrader: (1)

Joined: May 2012

Posts: 103

Likes: 0

From: NJ

spring compressors for coilover install?

i was wondering if I can get away with not using spring compressors to get the old struts out to install my coilovers. I've read through a few howto's and they say they will be needed but I'd like to hear other peoples experience's

Jul 3, 2012 | 12:09 AM

AnonymousG

Pole Position

iTrader: (2)

Joined: Jan 2011

Posts: 319

Likes: 0

From: Bay Area, CA

Not need at all. I think the only other thing I unbolted besides the shocks, were the swaybar links.

Jul 3, 2012 | 06:19 AM

INTIMAZY

Instructor

iTrader: (5)

Joined: Jan 2011

Posts: 1,208

Likes: 6

From: NY

Coilovers should all come pre-assembled or with adjustable spring perches so no need for a compressor.

Jul 3, 2012 | 08:34 AM

Tabaka

Lexus Champion

iTrader: (8)

Joined: Mar 2010

Posts: 3,811

Likes: 6

From: Dale City, VA

No, you will not need a spring compressor to remove or install your particular set up. If you had, lets say a new set of shocks or springs that came in separate pieces, then yes.

Jul 3, 2012 | 09:42 AM

Kris9884

Racer

iTrader: (7)

Joined: Jun 2012

Posts: 1,818

Likes: 30

From: OR

Nope, only for new struts or springs my man. Coilovers just bolt in place and adjust while on the car.

Jul 3, 2012 | 02:07 PM

pieisgude

Lexus Test Driver

iTrader: (2)

Joined: Sep 2009

Posts: 1,066

Likes: 1

From: SW VA

Just unbolt the sway bar end links, or if those are seized to hell like mine, unbolt the sway bar at the bushings/mounts. It makes it a whole lot easier and you don't need a compressor.

Jul 3, 2012 | 09:23 PM

KahnBB6

CL Community Team

iTrader: (5)

Joined: Jun 2010

Posts: 7,418

Likes: 1,363

From: FL & CA

You don't need them to remove a factory shock/spring setup or install a pre-assembled and preloaded of-the-shelf coil over. You do need to rent a spring compressor in order to reuse your OEM top hat for an assemble-it-yourself coil over setup like the Gixxer_Drew or similar coil over-- or a regular shock and spring upgrade.