work vs-xx 19 x 8.5 j at a 31 offset. As it stands i have a 1 finger gap between the stock calipers and the spoke.

 

If it has a high disk it should fit fine. You can also try this: http://www.stoptech.com/tech_info/wheel_fitment.shtml

 

not sure but we-I would like to see some more pics of the VS-XX mounted on your SC..

 

Look on the sticker of the inner barrel and if it says hi disk you should be fine. But if you say you have 1 finger gap right now it sounds like its going to be REALLY close. If anything just throw a spacer on.

 

honestly I don't think it will my fronts are 8 inch 29 offset but my spokes are so much thinner than those and it's roughly 1cm away from disaster...

bottom line: impossible without spacers

 

Remember... it does not matter about offset.... Its the face of the wheel that makes it work.

 

Man, I have a twin. I thought I was the only one in OC rocking the DWP on some gold VS-XX's . I have the same setup but my rims are 18's , waiting on my 97+ kit bur who knows when that day will come. All ya need is a drop and your all golden..

 

No it won't fit. Just pick up a set of 10mm spacers. You should be ok.