Notices
RX - 3rd Gen (2010-2015) Discussion topics related to the 2010 - 2015 RX350 and RX450H models

450h clicking sound

Thread Tools
 
Search this Thread
 
Old Jul 27, 2018 | 08:57 PM
  #1  
Patsy's Avatar
Patsy
Thread Starter
Driver School Candidate
 
Joined: Jul 2018
Posts: 3
Likes: 0
From: NSW
Thumbs down 450h clicking sound

Morning all,
Over the last week I have noticed a clicking sound coming from the front of the car (a bit like the old card in the bike spokes).
It only happens on deceleration, it doesn't matter if the car is in neutral or engaged (auto).
Has anyone heard of anything similar?
I am thinking either a driveshaft or something in the gearbox (really hoping not the gearbox).
Thanks in advance for any help!
Reply
Old Jul 27, 2018 | 09:53 PM
  #2  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,564
Likes: 1,388
From: Austin, TX
Default

Right, left or center?

You can jack up the car and try to spin the wheel [set the shifter in N]

Since you did not mention how loud ... it can be a pebble stuck in the treads.

Salim
Reply
Old Jul 28, 2018 | 12:02 AM
  #3  
HKPolice's Avatar
HKPolice
Driver School Candidate
 
Joined: May 2018
Posts: 18
Likes: 1
From: ON
Default

Most likely related to the brakes.
Reply
Old Jul 29, 2018 | 11:00 AM
  #4  
Clutchless's Avatar
Clutchless
CL Community Team
20 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2005
Posts: 7,192
Likes: 1,728
From: VA
Default

Could just be a rock stuck in the caliper dust shield.
Reply
Old Jul 31, 2018 | 04:29 AM
  #5  
Patsy's Avatar
Patsy
Thread Starter
Driver School Candidate
 
Joined: Jul 2018
Posts: 3
Likes: 0
From: NSW
Default

I have it booked in with Lexus this week so I will post whatever I hear back.
The noise occurs only during deceleration, on straights and corners and in both neutral and gear (automatic).
I've had the car jacked up and can definitely hear the sound after accelerating and then taking my foot off the gas.
I've also noticed that it sometimes takes a few minutes after driving to begin clicking.

Hopefully it's just an axle that needs re greasing or possibly a drive shaft and not something in the gearbox!
Reply
Old Jul 31, 2018 | 08:00 PM
  #6  
xvimalx's Avatar
xvimalx
Driver
 
Joined: Mar 2007
Posts: 62
Likes: 19
From: NJ
Default

I had the same issue. Greased both axel and the sound was gone!!
Reply
Old Jul 31, 2018 | 09:09 PM
  #7  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,564
Likes: 1,388
From: Austin, TX
Default

Originally Posted by xvimalx
I had the same issue. Greased both axel and the sound was gone!!
If you did the job yourself, can you please explain how you greased the axels?

Salim
Reply
Old Aug 1, 2018 | 04:17 PM
  #8  
xvimalx's Avatar
xvimalx
Driver
 
Joined: Mar 2007
Posts: 62
Likes: 19
From: NJ
Default

I had a local mechanic do it. He essentially took apart the wheel from the suspension, disconnected the axel from behind the rotor. Greased up that bit and reconnected everything. I apologize if I'm not explaining clearly.
Reply
Old Aug 1, 2018 | 08:09 PM
  #9  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,564
Likes: 1,388
From: Austin, TX
Default

Originally Posted by xvimalx
I had a local mechanic do it. He essentially took apart the wheel from the suspension, disconnected the axel from behind the rotor. Greased up that bit and reconnected everything. I apologize if I'm not explaining clearly.
Reason I asked was that there are no grease nipples and no place to grease. The CV joints are sealed. I guess the spline on the shaft needed a bit of grease.
Thank you for the detail.

Salim
Reply
Old Aug 2, 2018 | 10:35 AM
  #10  
MellonC00's Avatar
MellonC00
Instructor
 
Joined: Jun 2003
Posts: 938
Likes: 71
From: California
Default

Mods: Shouldn't this be in the Hybrid section?
Reply
Old Aug 2, 2018 | 08:18 PM
  #11  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,564
Likes: 1,388
From: Austin, TX
Default

Originally Posted by MellonC00
Mods: Shouldn't this be in the Hybrid section?
When I started to be more active in 3rd gen, I asked the question on the same lines.

Conclusion was let the thread starter make the choice. There are enough things in common.

Salim
Reply
Old Sep 11, 2018 | 08:34 PM
  #12  
thequickad's Avatar
thequickad
Rookie
 
Joined: May 2009
Posts: 51
Likes: 0
From: CA
Default

I have the same clicking noise (2013 RX450h) and the clicking noise is very noticeable and reproducible if I drive on a dirt road with a washboard type surface. Possibly something to do with the front suspension?
Reply
Old Sep 28, 2024 | 03:37 PM
  #13  
rx450h415's Avatar
rx450h415
Driver School Candidate
 
Joined: Oct 2021
Posts: 19
Likes: 1
From: CA
Default

I replaced my axle nut to fix this issue. The noise mine was making was almost like a ticking springing type noise at low speeds. At high speeds there is no noise. I removed my axle nut, i pushed in my axle as much as i could and i sprayed white lithium grease all over the space between the axle and the knuckle. i then used a 'brand new axle nut to re-tightened the axle. The noise is now gone.

Previously i tried simply tightening the nut, replacing brake pads, regreasing brake pin guides.

I have an rx450h. The noise will get louder and louder if not fixed.

Haard to sell or trade a car with that annoying loud ticking springy noise.
Reply
Old Sep 29, 2024 | 05:34 AM
  #14  
Clutchless's Avatar
Clutchless
CL Community Team
20 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2005
Posts: 7,192
Likes: 1,728
From: VA
Default

Recently there have been a few posts regarding noises that were traced to loose front axle nuts. Some just tightened them and others replaced the nuts.
Their getting loose must be a symptom of these aging vehicles and another item to add to the routine maintenance list.
Torque your front axle nuts. The setting is 217 foot pounds.
Reply
Old Sep 29, 2024 | 07:00 AM
  #15  
rx450h415's Avatar
rx450h415
Driver School Candidate
 
Joined: Oct 2021
Posts: 19
Likes: 1
From: CA
Default

thanks for your reply. The first thing I did was to try tightening the nut. Didn’t work for me. I have air tools so I was able to easily replace mine with a new one plus grease the inside.


Originally Posted by Clutchless
Recently there have been a few posts regarding noises that were traced to loose front axle nuts. Some just tightened them and others replaced the nuts.
Their getting loose must be a symptom of these aging vehicles and another item to add to the routine maintenance list.
Torque your front axle nuts. The setting is 217 foot pounds.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tro209
IS - 2nd Gen (2006-2013)
72
Oct 4, 2016 05:07 AM
randomwalk
LS - 4th Gen (2007-2017)
3
Jan 7, 2011 07:26 PM
M1K3L4RRY
SC - 1st Gen (1992-2000)
36
Sep 5, 2010 05:48 PM
NoHoIS350
IS - 2nd Gen (2006-2013)
5
Apr 29, 2009 03:23 PM




All times are GMT -7. The time now is 07:59 AM.