Dual pump hanger, what are ya'll using?
#2
Lexus Champion
iTrader: (4)
I have the SRT hanger and no complaints here. Too bad its not visible, because it looks awesome.
PHR makes one last I saw, also priced at $400. I heard JayRacing and Full Blown Motorsports now offer hangers for the IS300s.
PHR makes one last I saw, also priced at $400. I heard JayRacing and Full Blown Motorsports now offer hangers for the IS300s.
#4
Lexus Champion
iTrader: (14)
I have one, SRT used to put it on sale every once and while for $350 and I picked it up then. Pricey but is well built and fits perfect. It reuses the stock float, which does work, but because of the way the multiplex system seems to calculate the flow based on injector usage it isn't as linear as stock. It drops in a little less than 1/4 increments at a time, but the actual amount read is correct so I've been fine with it..
It will fit Walbro 255's, DeatschWerks, or the Aeromotive 340's. IS/GS share the same pump hangers so if you find another company making an IS one you use that as well.
Here's mine you can see the stock float mounted, I changed the way it was wired so each pumps positive is separate so I can control them independantly. And the common ground passthrough screw you see in the pic I added to ground both pumps, hanger, and a lead to the chassis as well.
It will fit Walbro 255's, DeatschWerks, or the Aeromotive 340's. IS/GS share the same pump hangers so if you find another company making an IS one you use that as well.
Here's mine you can see the stock float mounted, I changed the way it was wired so each pumps positive is separate so I can control them independantly. And the common ground passthrough screw you see in the pic I added to ground both pumps, hanger, and a lead to the chassis as well.
Trending Topics
#8
#10
I am selling my old modified stock hanger that holds twin pumps for cheap, I just upgraded tot he SRT one. The Aeromotive pumps won't work, I had to change my Aeromotive's out for AEM pumps. The problem is the feed needs to be on the same side as the pickup for it to work. On the Aeromotive they are on opposite sides as you can see here.
#11
Lexus Champion
iTrader: (14)
Adam the Aero Stealth's do work, they offer multiple configurations of the inlet-outlet.
For the GS/IS stock and SRT hangers one would need to use part # 11142 offset model that has the inline inlet-outlet.
http://aeromotiveinc.com/products-pa...-inlet-inline/
For the GS/IS stock and SRT hangers one would need to use part # 11142 offset model that has the inline inlet-outlet.
http://aeromotiveinc.com/products-pa...-inlet-inline/
I am selling my old modified stock hanger that holds twin pumps for cheap, I just upgraded tot he SRT one. The Aeromotive pumps won't work, I had to change my Aeromotive's out for AEM pumps. The problem is the feed needs to be on the same side as the pickup for it to work. On the Aeromotive they are on opposite sides as you can see here.
Last edited by 99 GS3; 02-03-13 at 02:59 PM.
#12
Driver
iTrader: (2)
Join Date: Dec 2011
Location: Maine
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
I am selling my old modified stock hanger that holds twin pumps for cheap, I just upgraded tot he SRT one. The Aeromotive pumps won't work, I had to change my Aeromotive's out for AEM pumps. The problem is the feed needs to be on the same side as the pickup for it to work. On the Aeromotive they are on opposite sides as you can see here.
#13
Lexus Champion
iTrader: (14)
Adam has it listed for sale in the classifieds.
https://www.clublexus.com/forums/2ge...-my-gs300.html
https://www.clublexus.com/forums/2ge...-my-gs300.html
Thread
Thread Starter
Forum
Replies
Last Post
bigghopper
2Gen GS430 / 400/ 300 Classifieds (98-05)
3
05-16-16 12:50 PM