Trunk Won't Open - 2012 Lexus 460 LS
Thread Starter
Driver School Candidate
Joined: Sep 2020
Posts: 4
Likes: 1
From: Texas
Trunk Won't Open - 2012 Lexus 460 LS
I cannot get my trunk to pop open at all. FOB button is not working and neither is the button in the car. Sucks! $250 deductible to take it in for warranty fix. What can I do to avoid that?
Pole Position
Joined: Nov 2018
Posts: 314
Likes: 57
From: IL
Thread Starter
Driver School Candidate
Joined: Sep 2020
Posts: 4
Likes: 1
From: Texas
I checked that and that is just to keep the valet out of the trunk. If it's not pushed in it inhibits the FOB and button on the driver's side from opening the trunk. The only way I can get it to open is to open the arm rest access to the trunk and use a stick to engage the emergency release actuator on the inside of the trunk lid. It opens then but once I close it again neither the FOB or the button on the driver's side will open the trunk.
Instructor
Joined: Sep 2019
Posts: 1,075
Likes: 471
From: SoFlo
I checked that and that is just to keep the valet out of the trunk. If it's not pushed in it inhibits the FOB and button on the driver's side from opening the trunk. The only way I can get it to open is to open the arm rest access to the trunk and use a stick to engage the emergency release actuator on the inside of the trunk lid. It opens then but once I close it again neither the FOB or the button on the driver's side will open the trunk.
Instructor
Joined: Jun 2014
Posts: 965
Likes: 575
From: az
This is only a guess. It could be something else too.
The electronic trunk lock mechanism is pretty common to fail on these. You can often get the fob to function again for a day by disconnecting the negative battery cable for 10 minutes then reconnecting it.
I'm impressed you could pull that emergency release with enough force to open the trunk. The outside of the trunk also has a key slot for your physical key within the fob to open the trunk. In my case the key slot did not function.
In my case I got the trunk to open using the "disconnect / reconnect battery" method. Then I replaced the lock actuator. It's a $250-300 part.
The electronic trunk lock mechanism is pretty common to fail on these. You can often get the fob to function again for a day by disconnecting the negative battery cable for 10 minutes then reconnecting it.
I'm impressed you could pull that emergency release with enough force to open the trunk. The outside of the trunk also has a key slot for your physical key within the fob to open the trunk. In my case the key slot did not function.
In my case I got the trunk to open using the "disconnect / reconnect battery" method. Then I replaced the lock actuator. It's a $250-300 part.
Thread
Thread Starter
Forum
Replies
Last Post
