lmao... i've done no less than 2 dozen swaps since the post.. but i work on car stereos allllll day anyway so im just immune now i guess...

but you guys all know how the heads turn when u drive down the block.. its like......

 

bwahahahahahaha

 

hi i was wondering if the bulb for the nike lights is easy to remove on the 2010 model becuz i did everything like on the older models and i didnt see no bulb at all .....please pm thanks

 

a little off subject but dose anyone know what low beam lights would best match up with my 6000k HID fog lights?

thanks

 

Garax HID bulbs 6000K would fit the bill.

 

thanks there on the way

 

Will these LEDs fit in the nike reflector?http://www.v-leds.com/Exterior-LED-B...07296-1-2.html

 

thanks for the pics and bulbs size info guys, so i ordered some 9smd, just came in the mailbox tonight when i got home from work, n i had to put them on right away!! i hope they last.....

 

........Nice!

 

What happens when you drop the bulb inside? Any tricks to get it out.

 

Lol..tell ya what, when you find out let Tee know ..we encountered the same issue..that is a deep opening so I am pretty sure it will require a bumper and headlight assembly removal and shake it loose..way more effort than what its worth..it won't hurt anything so let it rest in peace and get a new one

 

I got the answer!!! It happen to me on my install. Apparently the bulb was loose in the fitting and when I went to put it into place, it came off and down she went! I just about lost my mind and then I thought about it for a minute. I grabbed my telescopic magnet (which fit through the opening ohh so tight) and slid it down in the hole. Whatta ya know, the bulb attached to it and I CAREFULLY pulled it back out . Just take your time.

This is what I used. Good luck!

 

So my old led bulb fell in. I did not try the magnet idea, next ti e I take it apart maybe. Anyway I left it in, you cannot see it. For the new bulb I took a little electrical tape and taped the bulb to the socket. Hopefully if these fail I won't lose one.

 

Did you guys know the computer throws codes when your headlights fail? Turning your lights on and off with the harnesses disconnected throws a recordable event in the computer and the next time they bring up your computer log it will show.

Just thought everyone should know...

 

WARNING and UPDATE!!!!!

Everyone. After several months of having the 921 bulbs installed, I will need to recommend that you do not install these. Tee and I both have had burned out bulbs and I know in my case it was due to excessive heat. The 921s are 17 watts and there is simple not enough air space to keep these cool..even while driving. My bulb socket plug suffered minimal melting around the edges. So I replaced them today with 194 LEDs from autozone. They are 4 led with wide angle..not near as bright but will work for now. Here are the other sylvania mini bulbs that should fit and associated wattages..again..avoid 921s

Bulbs..
#168 = 4.9watts
#194= 4.6watts
#916=7.3watts
#906=9watts
#921= 17watts
#2825 & 2827=5watts, #922=12.5watts