Outside mirrors - up/down motor p/n??
#1
Driver School Candidate
Thread Starter
Outside mirrors - up/down motor p/n??
I'm looking for a p/n and source for the up/down motor for the outside mirrors - I assume it is the same motor for the left and right mirrors.. I saw some pics in other mirror threads with ASMO motors but I can't seem to find any online. Complete mirrors on-line are not too unreasonable and I could cannibalize one but I'd rather just get new motors if I can. Also if someone could post the wiring diagram for the adjustment switch and mirrors I'd appreciate it.
Originally I didn't have any adjustment so I cleaned the switch - that fixed the in/out but up/down (on both mirrors) still doesn't work. I haven't checked yet if voltage is getting to the motors.
Thnx,
Bill
2002 LS430
Originally I didn't have any adjustment so I cleaned the switch - that fixed the in/out but up/down (on both mirrors) still doesn't work. I haven't checked yet if voltage is getting to the motors.
Thnx,
Bill
2002 LS430
The following users liked this post:
williamcc (07-04-17)
The following users liked this post:
williamcc (07-04-17)
#4
Driver School Candidate
Thread Starter
#6
Intermediate
Mirror cap remove. Glass re install
Hi.
I am trying to go winkers on my jdm aristo 2.
I got the cap/ cover loose ( 4 screws) and thd 4 screws holdingbthe white position servo with the two holes
Removed thd assy from the car. Still cant get the cover off so i gave up and tried putting back together.
Now i cant get thd glass to lock in place. Itx hooking and vlipping ono the white square part but yhe two prongs seem to be critical and related to thd two silver spring steel thingies.
I at a losd.
Please help
I am trying to go winkers on my jdm aristo 2.
I got the cap/ cover loose ( 4 screws) and thd 4 screws holdingbthe white position servo with the two holes
Removed thd assy from the car. Still cant get the cover off so i gave up and tried putting back together.
Now i cant get thd glass to lock in place. Itx hooking and vlipping ono the white square part but yhe two prongs seem to be critical and related to thd two silver spring steel thingies.
I at a losd.
Please help
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
SamySalmon
IS - 2nd Gen (2006-2013)
1
12-30-16 04:02 AM