2021 IS Rear Turn Signal Bulb Swap to LED
09-20-21, 05:41 PM
#16
Pole Position
Thread Starter
09-20-21, 05:52 PM
#18
Racer
either I’m blind as a bat or it’s very subtle. Btw, it obviously doesn’t hyperflash outside, but does the car hyperflash in the cluster or no? Thanks in advance. I’m considering buying some Sylvania Zevo because I’ve had good experience in the past but I’m curious if I’ll need resistors with those bulbs. And I’m trying to avoid that as much as possible. It doesn’t look like the diode dynamics bulbs have any special resistor built in so my guess is that the Sylvanias might work without hyperflash on a car with the triple beams.
The following users liked this post:
skygunner (10-24-21)
09-20-21, 05:59 PM
#19
Pole Position
Thread Starter
either I’m blind as a bat or it’s very subtle. Btw, it obviously doesn’t hyperflash outside, but does the car hyperflash in the cluster or no? Thanks in advance. I’m considering buying some Sylvania Zevo because I’ve had good experience in the past but I’m curious if I’ll need resistors with those bulbs. And I’m trying to avoid that as much as possible. It doesn’t look like the diode dynamics bulbs have any special resistor built in so my guess is that the Sylvanias might work without hyperflash on a car with the triple beams.
The following users liked this post:
skygunner (10-24-21)
09-21-21, 06:14 AM
#21
09-24-21, 08:35 PM
#22
Pole Position
Thread Starter
10-23-21, 11:43 AM
#26
Driver School Candidate
Hello. I appreciate all of the info listed in this thread thus far. I recently bought a 2021 IS 350 F Sport AWD with triple beam headlights. Currently I'm trying to figure out if I need a type of load resistor, to swap out the rear turn signals. I am also trying to figure out the LED bulb size equivalent. I know the part number from Lexus/Toyota is 9098115011. I think the 194 would be the equivalent....or a 7440.
Does anyone know if this led light will work?
https://www.autozone.com/electrical-...d-2/432405_0_0
Thank you.
Does anyone know if this led light will work?
https://www.autozone.com/electrical-...d-2/432405_0_0
Thank you.
Last edited by skygunner; 10-23-21 at 12:12 PM.
10-23-21, 05:10 PM
#27
Racer
Hello. I appreciate all of the info listed in this thread thus far. I recently bought a 2021 IS 350 F Sport AWD with triple beam headlights. Currently I'm trying to figure out if I need a type of load resistor, to swap out the rear turn signals. I am also trying to figure out the LED bulb size equivalent. I know the part number from Lexus/Toyota is 9098115011. I think the 194 would be the equivalent....or a 7440.
Does anyone know if this led light will work?
https://www.autozone.com/electrical-...d-2/432405_0_0
Thank you.
Does anyone know if this led light will work?
https://www.autozone.com/electrical-...d-2/432405_0_0
Thank you.
The following users liked this post:
skygunner (10-23-21)
10-23-21, 06:08 PM
#29
Racer
Please do let us know how it goes. I’m waiting for my car to land but I too am considering putting the Sylvania Zevo LEDs solely because I’ve used them in the past and I love them. But I’m curious if we need resistors if we have triple beams. Good luck!
The following users liked this post:
skygunner (10-23-21)
10-23-21, 08:45 PM
#30
Driver School Candidate
Trunk
Vanity. The vanities maybe a little too bright...lol.
Door
The following users liked this post:
Compromise (10-23-21)