AGGRESSIVE ISX50 wheel thread
Driver
Joined: Sep 2009
Posts: 107
Likes: 0
From: tx
those sound like good sizes. Ive had 215/35 on a 18x9.5 so the front can strettchh a little more.
anyone have pics of rolled rears on an isx50? How much more room did it give?
I wanna try 19x9.5+12 19x10.5+12 w minimal stretch. no crazy camber
anyone have pics of rolled rears on an isx50? How much more room did it give?
I wanna try 19x9.5+12 19x10.5+12 w minimal stretch. no crazy camber
Ive looked through all pages of this thread and am no stranger to flush but new to the isx50 fitments. Ive had multiple 240sxs and 2 350zs with very aggressive wheels & offsets.
19x9.5+23 & 19x10.5+24 Work Meister S1 3pc is what I am purchasing. Tire sizes are probably going to be 225/35 & 235/35 dropped on Stance GR+ Coilovers. ANYONE RUNNING THESE EXACT SIZES?
I know that rolling the rear fenders is a must but what else should I expect? Seems like no matter what everyone seems to rub fender liner in the front for even some of the more conservative sizes because of the tab where the bumper meets fender. With a conservative drop, will I rub in the rear with 3 passengers? etc?
19x9.5+23 & 19x10.5+24 Work Meister S1 3pc is what I am purchasing. Tire sizes are probably going to be 225/35 & 235/35 dropped on Stance GR+ Coilovers. ANYONE RUNNING THESE EXACT SIZES?
I know that rolling the rear fenders is a must but what else should I expect? Seems like no matter what everyone seems to rub fender liner in the front for even some of the more conservative sizes because of the tab where the bumper meets fender. With a conservative drop, will I rub in the rear with 3 passengers? etc?
how would this work
20x10.5+22 245/30
20x8.5+27 225/30
im on eibach 250 springs 1.4" front 1.0" rear
i have literaly read every page and could not find these specs and what is needed to make it work.
20x10.5+22 245/30
20x8.5+27 225/30
im on eibach 250 springs 1.4" front 1.0" rear
i have literaly read every page and could not find these specs and what is needed to make it work.
Your going have to roll/pull the rears and maybe a minor roll/pull in the front.
You'll need some pretty aggressive fender work in the back. Also, you'd have to run 225-35 and 235-35.
Thread Starter
Lexus Test Driver
Joined: Feb 2008
Posts: 1,524
Likes: 1
From: Winnipeg, Canada
HELP!
Alright so my friend is in Japan right now and hunting for wheels for me. Anyway I can make these fit?
F １９インチ 10J +20前後114.3 5H ビックキャリパー対応
R 20インチ 11J +20前後 114.3 5H
Fender work obviously, what tires size, maybe shave 10mm off the wheel to bring them to a +30?
There are other set I know will fit but these are my top choice.
Alright so my friend is in Japan right now and hunting for wheels for me. Anyway I can make these fit?
F １９インチ 10J +20前後114.3 5H ビックキャリパー対応
R 20インチ 11J +20前後 114.3 5H
Fender work obviously, what tires size, maybe shave 10mm off the wheel to bring them to a +30?
There are other set I know will fit but these are my top choice.
HELP!
Alright so my friend is in Japan right now and hunting for wheels for me. Anyway I can make these fit?
F １９インチ 10J +20前後114.3 5H ビックキャリパー対応
R 20インチ 11J +20前後 114.3 5H
Fender work obviously, what tires size, maybe shave 10mm off the wheel to bring them to a +30?
There are other set I know will fit but these are my top choice.
Alright so my friend is in Japan right now and hunting for wheels for me. Anyway I can make these fit?
F １９インチ 10J +20前後114.3 5H ビックキャリパー対応
R 20インチ 11J +20前後 114.3 5H
Fender work obviously, what tires size, maybe shave 10mm off the wheel to bring them to a +30?
There are other set I know will fit but these are my top choice.
