hey guys I need help on VSC and VSC off
#1
Rookie
Thread Starter
Join Date: Apr 2012
Location: fl
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
hey guys I need help on VSC and VSC off
Hey guys my vsc and vsc off lights went on and car shakes wen I drive it sometimes like it wants to break down..anyone noe wats the issue? Ty
#2
usually when the VSC and VSC OFF light come on the check engine light comes on as well... take it to an autozone ask them to check the what code it is, then u might have a rough idea of ur issue
#3
Im having the same problem. Started a few days ago. my problem starts only when the car gets to warm running temperature. havent had the codes read yet but i am assuming it may be a o2 sensor. when i find out, i will let u guys know.
#6
while back I replaced my front wheel bearing, and after all was done my vsc off lights came on too....no check engine light tho, and runs perfectly fine....I could never get a direct on answer for this
Trending Topics
#8
I changed my timing belt and water pump it fixed the engine shaking problem but CEL and VSC off lights still came back up. BTW my belt lasted until 270KM...never changed it because my old mechanic told me it was a timing chain when I asked him to inspect it at 150KM.
#9
Lexus Test Driver
iTrader: (1)
That happen with my baby. I go to Auto Zone and the guy told me the codes. Was the Front Passenger Speed Sensor. I buy the original Speed Sensor and I install it myself, is very easy to do. Remove the tire on the front passenger side, you will see the sensor on the right side, Have 2 10mm screw and one plug. After I install it, I back to Auto Zone and the guy clear the code and the lights or problem solved. Good look.
#10
That happen with my baby. I go to Auto Zone and the guy told me the codes. Was the Front Passenger Speed Sensor. I buy the original Speed Sensor and I install it myself, is very easy to do. Remove the tire on the front passenger side, you will see the sensor on the right side, Have 2 10mm screw and one plug. After I install it, I back to Auto Zone and the guy clear the code and the lights or problem solved. Good look.
#13
I had te check engine and both vsc lights off got codes
P0400
P0455
P0136 o2 bank 1 sensor 2
So guessing it was o2 sensor but the lights went away on they're own and so far haven't come back guessing it's kinda on it's way out but not completely. Car would shake at idle and low speeds when the lights were on
P0400
P0455
P0136 o2 bank 1 sensor 2
So guessing it was o2 sensor but the lights went away on they're own and so far haven't come back guessing it's kinda on it's way out but not completely. Car would shake at idle and low speeds when the lights were on
#15
I fixed my problem by changing the OCV.
No more VSC and CEL and shaky engine.
Also I got it for mad cheap at partsouq.com ( an OEM supplier from Dubai) only took a week to ship.
OCV + cup holder divider.
86$ shipped + 24 $ custom fee at the door.
No more VSC and CEL and shaky engine.
Also I got it for mad cheap at partsouq.com ( an OEM supplier from Dubai) only took a week to ship.
OCV + cup holder divider.
86$ shipped + 24 $ custom fee at the door.
Thread
Thread Starter
Forum
Replies
Last Post