LED's underhood
a month or so ago i posted a thread about leds under the hood. got a few responses and i said id do it. after being lazy to do it, i finally did it this past week.
cost me about 30 bucks total and a couple hours of work (not hard work, just too my time). i placed them right under hood behind grill. routed the wire nicely and hidden. and wired it to a toggle switch so that i can shut them on and off from engine bay.
materials:
1. one 24 inch vleds 5000k led strip
2. toggle switch to shut leds on/off at will!
3. wire
4. plastic tubbing to protect wires.
pics in no particular order. i need a better night pics, but my camera doesnt seem to get it done. =/
either way, night view is pretty good. maybe another strip would add more brightness, but this one strip is concealed soo good you cant notice or see it unless you look for it. only way you know its there is when the light is on and u look underneath the hood for it.










cost me about 30 bucks total and a couple hours of work (not hard work, just too my time). i placed them right under hood behind grill. routed the wire nicely and hidden. and wired it to a toggle switch so that i can shut them on and off from engine bay.
materials:
1. one 24 inch vleds 5000k led strip
2. toggle switch to shut leds on/off at will!
3. wire
4. plastic tubbing to protect wires.
pics in no particular order. i need a better night pics, but my camera doesnt seem to get it done. =/
either way, night view is pretty good. maybe another strip would add more brightness, but this one strip is concealed soo good you cant notice or see it unless you look for it. only way you know its there is when the light is on and u look underneath the hood for it.










color is completely white. but led just looks blue in pics (theres an article on vleds on why 5k leds look blue. dont remember why exactly, but it just happends lol. but its 5k color. =D
thanks guys. up to now, no problems. i thought the heat under the hood would melt the leds or the cover around the led strip, but its been perfectly fine.doesnt feel hot at all either when i open the hood. guess we'll see over time. and no pinching on the wires yet.
Trending Topics
Or cut a hole in the hood and make it rotate to face out when the hood is closed.

Seriously though I need to do this on my car too. Will probably use two regular lamps though since they put out much more light. Nice work.

Seriously though I need to do this on my car too. Will probably use two regular lamps though since they put out much more light. Nice work.
Thread
Thread Starter
Forum
Replies
Last Post
kit cat
GS - 2nd Gen (1998-2005)
5
Sep 8, 2009 08:05 PM








