avic install ?
Same here... I haven't completed my DNX install yet because I can't find the reverse signal... Well, I found something last night. There is, finally, a link to the repair manual that works.
I want to also tap the Illumination wires at that level too instead of going up to the clock area (which is the middle wire ..based on the repair manual.. I prefer the radio area, but I will have to look for that).
I want to also tap the Illumination wires at that level too instead of going up to the clock area (which is the middle wire ..based on the repair manual.. I prefer the radio area, but I will have to look for that).
Here you go...
Radio Constant 12V+ Wire: Blue/Yellow
Radio Switched 12V+ Wire: Brown
Radio Ground Wire: Gray
Radio Illumination Wire: Green
Radio Dimmer Wire: N/A
Radio Power Antenna Trigger Wire: Black/Red
Radio Amplifier Turn On Trigger Wire: White/Blue
Front Speakers Size: 5 1/4″
Front Speakers Location: Doors
Left Front Speaker Wire (+): Pink
Left Front Speaker Wire (-): Purple
Right Front Speaker Wire (+): Light Green
Right Front Speaker Wire (-): Blue
Rear Speakers Size: 5 1/4″
Rear Speakers Location: Rear Door
Left Rear Speaker Wire (+): Black
Left Rear Speaker Wire (-): Yellow
Right Rear Speaker Wire (+): Red
Right Rear Speaker Wire (-): White
Radio Switched 12V+ Wire: Brown
Radio Ground Wire: Gray
Radio Illumination Wire: Green
Radio Dimmer Wire: N/A
Radio Power Antenna Trigger Wire: Black/Red
Radio Amplifier Turn On Trigger Wire: White/Blue
Front Speakers Size: 5 1/4″
Front Speakers Location: Doors
Left Front Speaker Wire (+): Pink
Left Front Speaker Wire (-): Purple
Right Front Speaker Wire (+): Light Green
Right Front Speaker Wire (-): Blue
Rear Speakers Size: 5 1/4″
Rear Speakers Location: Rear Door
Left Rear Speaker Wire (+): Black
Left Rear Speaker Wire (-): Yellow
Right Rear Speaker Wire (+): Red
Right Rear Speaker Wire (-): White
Trending Topics
Thread Starter
Driver
Joined: Jan 2008
Posts: 164
Likes: 9
From: oh
and for give me if iam slow but Radio Power Antenna Trigger Wire: Black/Red were is on the big connec or the small on the radio connectors and Stage3 thank for the help just still lost right now.
Is this for the gs?
Radio Power Antenna Trigger Wire: Black/Red
What is that used for? I'm confused, is that suppose to be the mini-round-atenna ?
There is two plugs that plugs into the back of the pioneer radio. One plug has two wires and the other plug has a whole bunch of wires (which I have adapter for it).
There are two antenna. One mini and one large (not sure if both can be used but there is an adapter for the mini at a local pepboys).
Is this for the gs?
Radio Power Antenna Trigger Wire: Black/Red
What is that used for? I'm confused, is that suppose to be the mini-round-atenna ?
There is two plugs that plugs into the back of the pioneer radio. One plug has two wires and the other plug has a whole bunch of wires (which I have adapter for it).
There are two antenna. One mini and one large (not sure if both can be used but there is an adapter for the mini at a local pepboys).
Radio Power Antenna Trigger Wire: Black/Red
What is that used for? I'm confused, is that suppose to be the mini-round-atenna ?
There is two plugs that plugs into the back of the pioneer radio. One plug has two wires and the other plug has a whole bunch of wires (which I have adapter for it).
There are two antenna. One mini and one large (not sure if both can be used but there is an adapter for the mini at a local pepboys).
Thread Starter
Driver
Joined: Jan 2008
Posts: 164
Likes: 9
From: oh
nice
This is my first time installing a radio...so my questions may be obvious. I'm still looking for the reverse signal.
Thread
Thread Starter
Forum
Replies
Last Post
