Pic request
There is no TTE kit. There is a front lip. Although there is also a rear insert lip, it does not make enough impact for people to get. Also, the insert needs a dual-tip exhaust setup on each side.
Here is the TTE front with L-Tuned sides and L-Sportline rear (lexforlife's car):
Here is the TTE front with L-Tuned sides and L-Sportline rear (lexforlife's car):
Lexus Champion
Joined: Jan 2004
Posts: 2,577
Likes: 1
From: Northern California
Originally Posted by Neo
There is no TTE kit. There is a front lip. Although there is also a rear insert lip, it does not make enough impact for people to get. Also, the insert needs a dual-tip exhaust setup on each side.
Here is the TTE front with L-Tuned sides and L-Sportline rear (lexforlife's car):
Here is the TTE front with L-Tuned sides and L-Sportline rear (lexforlife's car):
Driver
Joined: Aug 2005
Posts: 156
Likes: 0
From: wa
Originally Posted by Neo
RMM (JacobT's car):
Lexus Champion
Joined: Jan 2004
Posts: 2,577
Likes: 1
From: Northern California
the wheels are the 20" Dronell CA05, and as I understand it, they are rare and dicontinued. There is a set for sale in the classified's...click here. This beautiful ride also has aftermarket exhausts, full cat back i believe, and not tips. Not sure whether your car would have the same affect given that you dont want to lower it...it just wouldnt look as aggressive without lowering it form the stock height.
Trending Topics
Originally Posted by LXBOY
That is how I would like my car to look like except not lowered, since I have heared how much it could cost when the control arms need to be replaced and since they wear out faster too, I don't know if it is true but every mechanic I spoke too advised me that. What kind of wheels are these. And does this car has an exhaust or just the tips.
Our cars get the stress no matter what.... Just putting 20's on your car is enough stress even if you don't lower it.... I was skepitical to about lowering the car.... With the right parts and driving sensibly your car should be fine.... I'm also down the road planning on replacing some front suspension pieces to give me a peace of mind....
Good Luck on your quest
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
Driver
Joined: Aug 2005
Posts: 156
Likes: 0
From: wa
Originally Posted by tmf2004
If you don't drive your car to aggressive through turns etc your control arms should be fine.... Someone such as Ed is a very aggressive driver who puts alot of stress on those suspension parts.. Thats why he has replaced almost every front piece... I have driven with ed so i know first hand...He's very knowledgable on this subject Our cars get the stress no matter what.... Just putting 20's on your car is enough stress even if you don't lower it....
I was skepitical to about lowering the car.... With the right parts and driving sensibly your car should be fine.... I'm also down the road planning on replacing some front suspension pieces to give me a peace of mind.... Good Luck on your quest
Our cars get the stress no matter what.... Just putting 20's on your car is enough stress even if you don't lower it.... I was skepitical to about lowering the car.... With the right parts and driving sensibly your car should be fine.... I'm also down the road planning on replacing some front suspension pieces to give me a peace of mind....
Good Luck on your quest 
Lead Lap
Joined: Feb 2001
Posts: 582
Likes: 5
From: Austin Texas
Originally Posted by LXBOY
That is how I would like my car to look like except not lowered, since I have heared how much it could cost when the control arms need to be replaced and since they wear out faster too, I don't know if it is true but every mechanic I spoke too advised me that. What kind of wheels are these. And does this car has an exhaust or just the tips.
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
Originally Posted by SPEED&ECO.
thnx for all the replies guys. I have a question about the RMM, do the stock fogs fit ?
thank you
thank you
Originally Posted by JacobT
LXBOY,
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
Last edited by GS wanted; Oct 10, 2005 at 02:51 PM.
Originally Posted by JacobT
LXBOY,
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
I've seen this car in person, these pics really don't do it justice, awesome ride
Driver
Joined: Aug 2005
Posts: 156
Likes: 0
From: wa
Originally Posted by JacobT
LXBOY,
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
Originally Posted by JacobT
LXBOY,
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
That is my GS4. The exhaust is Greddy PE cat back system. I have lowered the car even more with Tein CS now.
NIce look Jacob
even better now that it sit's a little lower