Homelink problem.
#1
Lead Lap
Thread Starter
Homelink problem.
2 months ago I started having problems with my homelink.
One day when I left home I closed the garage door like I normally do but when I arrived I was not able to open the door because my homelink was dead, there was no red LED. Couple days later it started working. I thought it is just a computer glitch.
Now, again. All the fuses are good, overhead console lights and buttons work. Last night I dropped the console, I checked all the connectors and they were plugged and good.
One day when I left home I closed the garage door like I normally do but when I arrived I was not able to open the door because my homelink was dead, there was no red LED. Couple days later it started working. I thought it is just a computer glitch.
Now, again. All the fuses are good, overhead console lights and buttons work. Last night I dropped the console, I checked all the connectors and they were plugged and good.
Last edited by ESh; 01-10-17 at 05:47 PM.
#2
Unfortunately no idea here. But, I had the same problem a few months ago that got to the stage it just stopped working completely. So I purchased this kit https://www.amazon.com/LiftMaster-My...ter+remote+myq
and it works perfectly. Should have got it sooner.
and it works perfectly. Should have got it sooner.
The following users liked this post:
ESh (01-10-17)
The following users liked this post:
ESh (01-10-17)
#4
Lead Lap
Thread Starter
I tried to hit the overhead console but that did not help.
#5
The stuck button was quite visible. If you didn't see this then my problem isn't the same as yours. Maybe something worse like a loose connection.
FWIW, I had to unstick it by pushing and wiggling it. Even after unsticking, it wouldn't work. Fortunately I had one of the other buttons programmed for the same door. I used that and only then did the other button start working again.
FWIW, I had to unstick it by pushing and wiggling it. Even after unsticking, it wouldn't work. Fortunately I had one of the other buttons programmed for the same door. I used that and only then did the other button start working again.
The following users liked this post:
ESh (01-10-17)
#7
Lead Lap
Thread Starter
Trending Topics
#8
Lead Lap
Thread Starter
So, I did it:
Now works like magic.
Now works like magic.
#10
Lead Lap
Thread Starter
Yes, that wire was loose.
Thread
Thread Starter
Forum
Replies
Last Post