ClubLexus - Lexus Forum Discussion
The engine is supported by 2 jacks. Use carpet and wood to distribute the load on the oil pan.
The engine is supported by 2 jacks. Use carpet and wood to distribute the load on the oil pan.
0 2019/12/11 09:33:03
Another view of the right engine mount and bracket. I did not replace the small vibration damper. I did call the dealer to inquire about it. Apparently there are only 5 in stock over the entire country. I don't think it's something that normally get's worn out or needs replacing
Another view of the right engine mount and bracket. I did not replace the small vibration damper. I did call the dealer to inquire about it. Apparently there are only 5 in stock over the entire country. I don't think it's something that normally get's worn out or needs replacing
0 2019/12/11 09:32:39
Right engine mount and bracket. Don't forget to reuse the 1/4" spacer inside of it!
Right engine mount and bracket. Don't forget to reuse the 1/4" spacer inside of it!
0 2019/12/11 09:32:20
I used ratchet straps to hold the steering knuckle assembly out of the way. left side
I used ratchet straps to hold the steering knuckle assembly out of the way. left side
0 2019/12/11 09:32:00
I used ratchet straps to hold the steering knuckle assembly out of the way. Right side
I used ratchet straps to hold the steering knuckle assembly out of the way. Right side
0 2019/12/11 09:31:40
I used ratchet straps to hold the steering knuckle assembly out of the way. right side
I used ratchet straps to hold the steering knuckle assembly out of the way. right side
0 2019/12/11 09:29:38
Sub frame is out. I used a transmission jack to move the sub frame back into place for reassembly. I still needed help.
Sub frame is out. I used a transmission jack to move the sub frame back into place for reassembly. I still needed help.
0 2019/12/11 09:29:10
This is the alignment nub I was referring to. Left side mount faces one way. Right side mount faces the opposite way. The mounts themselves are identical so you need to orientate them the correct way.
This is the alignment nub I was referring to. Left side mount faces one way. Right side mount faces the opposite way. The mounts themselves are identical so you need to orientate them the correct way.
0 2019/12/10 20:44:37
Toward the top of this picture the rack and pinion with it's 4 mounting bolts can be seen.
Toward the top of this picture the rack and pinion with it's 4 mounting bolts can be seen.
0 2019/12/09 08:47:49
The drive up ramps I left under the car for added safety. I supported the vehicle with 6 ton jack stands on the frame of the car. My jack stands are padded and still left slight marks in the frame. I suggest using a piece of 2x4 or similar wood between the jack stand and the frame.
The drive up ramps I left under the car for added safety. I supported the vehicle with 6 ton jack stands on the frame of the car. My jack stands are padded and still left slight marks in the frame. I suggest using a piece of 2x4 or similar wood between the jack stand and the frame.
0 2019/12/09 08:47:24
You need either a transmission jack or 2 jacks like I used to support the engine so it doesn't tilt.
You need either a transmission jack or 2 jacks like I used to support the engine so it doesn't tilt.
0 2019/12/09 08:47:04
The engine is supported by 2 jacks. Use carpet and wood to distribute the load on the oil pan.
The engine is supported by 2 jacks. Use carpet and wood to distribute the load on the oil pan.
0 2019/12/09 08:46:42
Another view of the right engine mount and bracket. I did not replace the small vibration damper. I did call the dealer to inquire about it. Apparently there are only 5 in stock over the entire country. I don't think it's something that normally get's worn out or needs replacing.
Another view of the right engine mount and bracket. I did not replace the small vibration damper. I did call the dealer to inquire about it. Apparently there are only 5 in stock over the entire country. I don't think it's something that normally get's worn out or needs replacing.
0 2019/12/09 08:46:21
Right engine mount and bracket.
Right engine mount and bracket.
0 2019/12/09 08:46:03
I used ratchet straps to hold the steering knuckle assembly out of the way. left side
I used ratchet straps to hold the steering knuckle assembly out of the way. left side
0 2019/12/09 08:45:45
I used ratchet straps to hold the steering knuckle assembly out of the way. right side
I used ratchet straps to hold the steering knuckle assembly out of the way. right side
0 2019/12/09 08:45:26
Sub frame is out. I used a transmission jack to move the sub frame back into place for reassembly. I still needed help.
Sub frame is out. I used a transmission jack to move the sub frame back into place for reassembly. I still needed help.
0 2019/12/09 08:45:06