ClubLexus - Lexus Forum Discussion
The small allen bit was cut from another socket. It's the one I made to use in the front diff fill plug.
The small allen bit was cut from another socket. It's the one I made to use in the front diff fill plug.
0 2021/02/07 18:54:17
The small allen bit was cut from another socket. It's the one I made to use in the front diff fill plug.
The small allen bit was cut from another socket. It's the one I made to use in the front diff fill plug.
0 2021/02/07 18:54:13
This thing was tight! I had 2 wrenches doubled up. 1.5 ft long to break it free.
This thing was tight! I had 2 wrenches doubled up. 1.5 ft long to break it free.
0 2021/02/07 18:54:09
I cut an allen bit to fit in the fill plug for the front diff. I didn't feel like messing with that ground / electrical connector that was in the way.
I cut an allen bit to fit in the fill plug for the front diff. I didn't feel like messing with that ground / electrical connector that was in the way.
0 2021/02/07 18:54:05
I missed a spot!
I missed a spot!
0 2021/02/07 18:53:39
I cleaned this up a bit.
I cleaned this up a bit.
0 2021/02/07 18:53:35
0 2021/02/07 18:53:09
0 2021/02/07 18:53:05
0 2021/02/07 18:53:01
It's kinda level.
It's kinda level.
0 2021/02/07 18:52:59
In a few months it's going to be too hot to do this on the driveway. I'm enjoying the cool weather while it lasts.
In a few months it's going to be too hot to do this on the driveway. I'm enjoying the cool weather while it lasts.
0 2021/02/07 18:52:55
Of course new gaskets were used.
Of course new gaskets were used.
0 2021/02/07 18:52:51
The rear diff magnetic drain plug had a bunch of crud on it.
The rear diff magnetic drain plug had a bunch of crud on it.
0 2021/02/07 18:52:47
0 2021/02/07 18:50:31
I made a 90 degree fitting to free up one of my hands.
I made a 90 degree fitting to free up one of my hands.
0 2021/02/07 18:50:27
0 2021/02/07 18:26:32
Bad circuit board.
Bad circuit board.
0 2021/02/07 18:26:29
0 2021/02/07 18:26:25
0 2021/02/07 18:26:22
Washers installed.
Washers installed.
0 2021/02/07 18:26:19
I added these washers.
I added these washers.
0 2021/02/07 18:26:16
Big gap allows for too much side to side play.
Big gap allows for too much side to side play.
0 2021/02/07 18:26:13
0 2021/02/07 18:26:11
0 2021/02/07 18:26:08
Once I figured out a way to compress the spring the c clip was easy to install.
Once I figured out a way to compress the spring the c clip was easy to install.
0 2021/02/07 18:26:04
Notice that C clip. Don't take it off. It's a pia to get back on lol.
Notice that C clip. Don't take it off. It's a pia to get back on lol.
0 2021/02/07 18:26:00
0 2021/02/07 18:25:56
0 2021/02/07 18:25:53
0 2021/02/07 18:25:49
Keeping track of which ones have washers for the new mirror.
Keeping track of which ones have washers for the new mirror.
0 2021/02/07 18:25:45
I've snapped that locking tab on all of these I've opened. Luckily it doesn't seem to cause any side effects. They are still tight when assembled.
I've snapped that locking tab on all of these I've opened. Luckily it doesn't seem to cause any side effects. They are still tight when assembled.
0 2021/02/07 18:25:41
0 2021/02/05 20:40:54
0 2021/02/05 20:40:22
0 2021/02/05 20:39:57
0 2021/02/05 20:39:18
0 2021/02/05 20:38:32
0 2021/02/05 20:38:16
0 2021/02/05 17:16:09
0 2021/02/05 17:15:58
0 2021/02/05 17:15:48