Body over rims look?
#1
Lexus Champion
Thread Starter
Body over rims look?
I am a new to all this vip styling. I wonder how do you acieve the look on the picture under(its from somebody here at cl) Do you have to "BAG" the car to have the body over the rim? Is it me or is the back wheel crooked? Will the rims hit the fenders? Sorry but I really have no clue
Last edited by EN_VY; 08-12-07 at 10:52 PM. Reason: no picture
#2
VIP|EXEstyle セルシオ
iTrader: (3)
You can achieve the look with airbags or coilovers, or even a combination of both. But with coilovers, it wouldn't be very practical because you wouldn't be able to drive around at that height without destroying the bodykit.
The back wheel is crooked because of the negative camber you normally get when you lower the vehicle that much. The wheels on that GS do not hit the fender because the owner modified his fenders to fit the specs of the wheels. As long as you have the right wheel specs and the proper fender modifications to go with those specs, the wheels will not hit/rub the fenders.
The back wheel is crooked because of the negative camber you normally get when you lower the vehicle that much. The wheels on that GS do not hit the fender because the owner modified his fenders to fit the specs of the wheels. As long as you have the right wheel specs and the proper fender modifications to go with those specs, the wheels will not hit/rub the fenders.
#6
Zombie Slayer
Pulling the fenders does that. Rolling the fenders only bends the small lip inside the fender up so there is more clearance.
#13
19x11.5 -51
iTrader: (4)
you have already posted a picture of it...
Here is an attached image of the tuck look .. I havent got spacers yet but dont mind this look at all ...
See how mine is tucked and His is perfectly flush ?
This is another shot of tucking ... Hmm Still deciding on keeping these wheels lol ...
Here is an attached image of the tuck look .. I havent got spacers yet but dont mind this look at all ...
See how mine is tucked and His is perfectly flush ?
This is another shot of tucking ... Hmm Still deciding on keeping these wheels lol ...
Thread
Thread Starter
Forum
Replies
Last Post