When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey folks, thanks to Robert I now have a 664 on a 1990 LS4.
It rocks. However, I heard there is a way to make it go lower by pressing some buttons to bypass a safety feature? Also another method to make it go super-low (obviously non-driveable on super-low).
However, I think that is the instruction for the ASI65, since there is no "front down" button on the ASE664.
I may play around with that sequence you mentioned with some of the other buttons to see if it works, until someone else chimes in with ASE664-specific instructions.
those instructions are for the asi65, those were the directions dom gave me for my controller!! there should be a similar procedure for the ase though, just go to vsc and ask dominik. if anything, make a thread on vsc asking how to do it, and someone will be able to translate your user manual for the controller.
those instructions are for the asi65, those were the directions dom gave me for my controller!! there should be a similar procedure for the ase though, just go to vsc and ask dominik. if anything, make a thread on vsc asking how to do it, and someone will be able to translate your user manual for the controller.
Thanks.
What's the link to the VSC forum? (I thought THIS subforum was what folks were talking about!)
just go register on the forums. dominik is really knowledgeable about this kind of stuff, so just pm him. and if he doesn't know, just ask someone to translate the manual!
Here's an update: one the 664, you just hold the left 2 buttons together for 6 seconds, and it resets the computer and at the initial screen it allows you to select a safety or special mode, and special is where the super-low unlock is held!