When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
been lookin at the tanabe nf210 springs is anybody out there running these springs? 1.5 front 1.1 rear. im also running a 15 mm spacer on the rear with 20x8.5's all arround. will this set up cause any rubbing issues?
been lookin at the tanabe nf210 springs is anybody out there running these springs? 1.5 front 1.1 rear. im also running a 15 mm spacer on the rear with 20x8.5's all arround. will this set up cause any rubbing issues?
Im running these springs with Blisten struts, the ride is close to stock,,my rear wheels are 10in wide so I had to have my rear fender rolled
Im running these springs with Blisten struts, the ride is close to stock,,my rear wheels are 10in wide so I had to have my rear fender rolled
my 20x8.5 with that spacer is probley close to that 10 incher your running. I wasnt wanting to have to roll anything......ooohhh! i dont know what to do!
no rubbing now but im sittin stock. just concerned dont really want to cut the car up. the ride is pertty much like stock?
I dont think your 8.5in wheel even with spacers will be wider than 10in, you should be fine, and yes my car does ride close to stock with the Tanabe/Bilstien struts, then I added sways, strut bars, bushings and rear lower chassis brace, no it rides alot firmer
NF's drop isn't all that aggressive. I think you should be fine. It's not like you're gunna be tucked. What offset are the wheels?
The wheels are +40mm offset. I can all way's take the spacers off, but i dont like the way the wheels set in so far. I droped the order today anyway so ima do what i gotta do to make it work. I also plan on doin the kyb's, bushings, H-brace, and strut bars. I like a real tight setup cause i allway's drive it like i stole it thanks for the help you guy's I'll be sure to post up some pics.
been lookin at the tanabe nf210 springs is anybody out there running these springs? 1.5 front 1.1 rear. im also running a 15 mm spacer on the rear with 20x8.5's all arround. will this set up cause any rubbing issues?
hey, how long have you been running the 15mm spacers with the 20s? do you have a picture of how far the rear comes out?
hey, how long have you been running the 15mm spacers with the 20s? do you have a picture of how far the rear comes out?
I'll take one when i get to my shop in the morning. been running the spacer for bout a month no problems with them at all, hub centric drs style longer studs.
they are the Ichiba drs style. they come with the longer studs a little bit of a pain to put the studs in cause of the park brake, but over all im happy with it. they were about $113.00 shiped a little cheeper than the h&r's..
eman88, are thoes 20x10's on the rear or are you using a spacer to get'em out there? thoes wheels are hot!!! the drop isnt too bad looks about like what i was goin for. the springs shiped out yesterday so i should have them friday hopefully thanks for the pic's man. i think that setup gonna be perfect for me!