When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What kind of BT adapter u used for the diy aux u did
Originally Posted by Blanco
Yes, play and charge at the same time. Added a BT module, so now I don't even have to connect phone to listen to music. Can just stream over bt. I prefer the sound quality of the direct 30 pin connection. Sounds better than the 3.5, or streaming.
Hey I did the same diy aux output and my BT adapter sounds like crap what adapter did u use? Thanks
Hey I did the same diy aux output and my BT adapter sounds like crap what adapter did u use? Thanks
I really like this one so far, audio sounds great and the mic is better than any other I have used (JVC headunit and a pioneer 80PRS headunit). Very solid reviews as well.
Hey guys, I know this is an old thread but i have a question about the wiring. In the write-up the op says that Right + and Right - need to be connected together and Left+ and Left- connected together and then attached to the headphone jack. Looking at the pinout for a headphone jack you can see the R- and L- are actually on the sleeve. My question is: would it be better to attached the negatives to the sleeve or just connect them together and then have the sleeve go to ground. Pic below for reference.
What kind of BT adapter u used for the diy aux u did
