Affordable Wheel Ideas ?
#31
wish my sc had 700whp lol gl on the wheel search...
so many options.... I'd personally go with a nice set of RPF-1s and be done with it, super lightweight and can be had for less than $1500 w/tires..
so many options.... I'd personally go with a nice set of RPF-1s and be done with it, super lightweight and can be had for less than $1500 w/tires..
Last edited by TheHoboMan; 04-25-13 at 04:54 AM.
#32
gte & na-t
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
I ran some nitto 275 on the rear and my car hooked great on the TT wheels.
Weldcraft can widen them for you if you wanna run some 305/315 on the rear.
My car dead hooks on 18s depending on your setup and what tires you are running! I am running 18x12 with 315/30/18 Toyo r888.
Weldcraft can widen them for you if you wanna run some 305/315 on the rear.
My car dead hooks on 18s depending on your setup and what tires you are running! I am running 18x12 with 315/30/18 Toyo r888.
#33
Moderator
iTrader: (71)
I ran some nitto 275 on the rear and my car hooked great on the TT wheels.
Weldcraft can widen them for you if you wanna run some 305/315 on the rear.
My car dead hooks on 18s depending on your setup and what tires you are running! I am running 18x12 with 315/30/18 Toyo r888.
Weldcraft can widen them for you if you wanna run some 305/315 on the rear.
My car dead hooks on 18s depending on your setup and what tires you are running! I am running 18x12 with 315/30/18 Toyo r888.
G35 rears widened 2 inches for a meatier look. 305/30/19 Thx Earnest C
http://www.weldcraftwheels.com/index-6.html
Mods if I'm not allowed to post this link, I apologize I just wanted to try and help answer some questions about how the wheels look widened.
thx,
steve
#36
Pole Position
Join Date: Dec 2012
Location: Delaware
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
cheap? try local craigslist or the forums based on the 240, 350, 370, g35, g37, rx7, mustang, acura, platforms. I picked up a set of G35 wheels for $100 but found out later one was shaped like an egg, in which I had to pay $40 to get fixed. I still havent installed them on my car as I am waiting on my hubcentric spacers and I need to strip them down for paint (hammered gunmetal with silver flake). My G36 wheels are the 17" variety (which is what I wanted) with 7.5" fronts and 8" rears. the fronts hold 235's no problme and the rears currently have 255's on them. both appear to be able to handle more width (ie they look hella flush now)
Thread
Thread Starter
Forum
Replies
Last Post