Notices
SC - 1st Gen (1992-2000)

i need some Air conditioning help

Thread Tools
 
Search this Thread
 
Old Aug 9, 2009 | 12:22 PM
  #1  
lizmo's Avatar
lizmo
Thread Starter
Driver School Candidate
 
Joined: Jul 2009
Posts: 12
Likes: 0
From: wi
Default i need some Air conditioning help

Hey guys/gals.

i recently got a SC300 (1996) and when i first took the car the air blew somewhat cool, but it has since gotten worse. so i went and got a re-charge kit and tried it and the compresser wouldn't kick on to suck the freon through the system.

The A/C light DOES NOT blink, and it is not on all the time, only when i have the A/c turned on. My outside temp thing reads the temp as well. so it doesn't sound like a typical compresser problem. what do you think it could be? a line or the compresser?

thanks

- Liz.
Reply
Old Aug 10, 2009 | 05:02 AM
  #2  
bodydrager's Avatar
bodydrager
Rookie
iTrader: (4)
 
Joined: Oct 2008
Posts: 85
Likes: 0
From: Houston,Tx
Default

You will more than likely need to jump the pressure switch with a paperclip in order to get the compressor to kick on to suck up the freon.
Reply
Old Aug 10, 2009 | 07:15 AM
  #3  
lizmo's Avatar
lizmo
Thread Starter
Driver School Candidate
 
Joined: Jul 2009
Posts: 12
Likes: 0
From: wi
Default

thanks, where exactly is the pressure switch?
Reply
Old Aug 10, 2009 | 12:21 PM
  #4  
codetoad's Avatar
codetoad
Lead Lap
iTrader: (2)
 
Joined: Oct 2004
Posts: 480
Likes: 0
From: Northwest Florida
Default

its on the compressor, isnt it?
Reply
Old Aug 13, 2009 | 09:29 AM
  #5  
bodydrager's Avatar
bodydrager
Rookie
iTrader: (4)
 
Joined: Oct 2008
Posts: 85
Likes: 0
From: Houston,Tx
Default

It could also be the compressor clutch is going out. I've had one do the same thing and come to find out it was the compressor clutch. Also it could be low on freon. The system doesn't have enough to build the preasure needed to keep the system cycling at high speeds.
Reply
Old Aug 13, 2009 | 09:26 PM
  #6  
Toshima's Avatar
Toshima
Pole Position
 
Joined: Sep 2006
Posts: 284
Likes: 2
From: tx
Default

My ac system was empty (hole in line , got new one put on.) When I went to recharge it. The compressor didnt kick on right away. Took about 30 sec, then kicked on and started to take the freon. Also when you went to add freon you had the car on with the ac on high right?
Reply
Old Aug 14, 2009 | 08:53 PM
  #7  
Flick2JZ's Avatar
Flick2JZ
Driver
 
Joined: Jun 2008
Posts: 63
Likes: 0
From: WI
Default

yes it was on high, but i never even heard the ac kick on... and i dont really know how to jump the pressure switch so im prob not gonna do that and break something lol.
Reply
Old Aug 14, 2009 | 08:53 PM
  #8  
Flick2JZ's Avatar
Flick2JZ
Driver
 
Joined: Jun 2008
Posts: 63
Likes: 0
From: WI
Default

btw im on my BF's name (so noone is confused)
-Lizmo
Reply
Old Aug 15, 2009 | 02:33 PM
  #9  
tritron's Avatar
tritron
Lead Lap
 
Joined: Aug 2003
Posts: 471
Likes: 0
From: Colorado
Default

I just managed to fix my a/c I had a/c that will not turn on. I just installed driftmotion power steering hose. I removed the valve at power steering pump and connected both inlet and outlet of vacuum hoses that went to valve. I replaced some other vacuum hoses with quality silicone hoses I had vacuum leek. I would look for vacuum leek also look on bottom of your a/c compressor there is sensor with black cable clean it well also clean cables that go to compressor make sure the connector is firmly secured. I would also disconect ground cable. My a/c kicked in and it was blowing cold air.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Seppi
SC - 1st Gen (1992-2000)
4
Jul 3, 2024 10:33 AM
chlenz62
SC430 - 2nd Gen (2001-2010)
5
Jun 13, 2019 07:06 PM
eliteskill
Maintenance
26
Aug 19, 2011 04:08 PM
ehigazy
GS - 1st Gen (1993-1997)
11
Jul 24, 2010 02:15 AM
kaozzsc3/4
SC - 1st Gen (1992-2000)
6
Jun 25, 2009 10:05 AM




All times are GMT -7. The time now is 11:16 PM.