Help diagnose error codes '95 SC400
Thread Starter
Driver School Candidate
Joined: Apr 2007
Posts: 11
Likes: 2
From: Dallas, TX
Help diagnose error codes '95 SC400
Can anyone help with error code diagnosis on my '95 SC400? My main problem is that TRAC lights intermittently when driving (sanely). I'm not sure ABS works either, but that is a side issue.
My diagnostic port is under the dash. I jumper E1 and TC to get:
TRAC code 43
ABS code 54
airbag and cruise flash continuously
Searching this forum, there seem to be different diagnostic procedures depending on model year and perhaps engine size. I read that the diagnostic port is either on the intake manifold (I don't see it) or under the dash (got it). I also read that E1 is to be jumpered with TE1 or TE2 or TC. The first two yield no codes, and only light the CEL and something else (cruise?) continuously. And I can't find mention of these specific codes.
My diagnostic port is under the dash. I jumper E1 and TC to get:
TRAC code 43
ABS code 54
airbag and cruise flash continuously
Searching this forum, there seem to be different diagnostic procedures depending on model year and perhaps engine size. I read that the diagnostic port is either on the intake manifold (I don't see it) or under the dash (got it). I also read that E1 is to be jumpered with TE1 or TE2 or TC. The first two yield no codes, and only light the CEL and something else (cruise?) continuously. And I can't find mention of these specific codes.
Driver
Joined: Mar 2007
Posts: 108
Likes: 2
From: Alabama
Thread
Thread Starter
Forum
Replies
Last Post
Neil4Speed
SC - 1st Gen (1992-2000)
5
Jun 23, 2012 10:30 AM
2cars4Trbo
SC - 1st Gen (1992-2000)
4
Oct 21, 2011 09:11 AM
CallmeQ
GS - 1st Gen (1993-1997)
2
Sep 26, 2009 12:19 PM
