When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Originally posted by rodel Has anyone swapped in the 2J 5 speed auto tranny into their SC300? If so, could you provide a brief description of what was involved, ECU wise?
there is no 5speed auto tranny that links up to the 2jz?
ive never heard of a 5 speed auto for our cars besides the jdm one that comes on some aristos.... but if you want a new auto transmission i would deffinatly get a boost logic i will be soon
Originally posted by soarer479 ive never heard of a 5 speed auto for our cars besides the jdm one that comes on some aristos.... but if you want a new auto transmission i would deffinatly get a boost logic i will be soon
The Aristo tranny should bolt up to the SC300, since they both have 2J engines. The issue that I'm trying to address is not a matter of bolting up...but a matter of tranny ECU compabilities.
Hmmm... On a stock car I doubt that'd make much of a difference but If your that concerned about running lower rpms change out your rear end gear much easier.
If you really want to do that swap you'll be swapping ecu's out and probably a little bit of wiring. Less hassle putting it in a 98+ Sc300 probably anything earlier I believe your gonna be running into some problems. Definitely check driveshaft length to since all Sc300's came with the 4spds.