Boostlogic kits on a 97 sc300
Thread Starter
Rookie
Joined: Mar 2004
Posts: 61
Likes: 0
From: Georgia
Boostlogic kits on a 97 sc300
Hello everyone,
Found your forum while searching the web for turbo informaion for the sc300. I just ordered a Boostlogic turbo kit for my 97 sc300 and I am looking for anyone who has installed one before. I would like to know if what issues you had, how you like it and basic over all performance? Below is a list of parts that I will be installing. This is phase 1 and already planning phase 2, that is after I save up more cash. If you guys see anything else I missed please feel free to pipe in.
3mm head gasket
Greddy, Boost Controllers Profec B Spec II Black
Apexi, Fuel Computers S-AFC II (NEW Version 2) Black Face
550 cc injectors
Boost Logic 321SS Tubular Manifold 1 5/8” Tubing and 1/2” Thick 321SS Flanges
(Turbo’s with a 4” inlet clears the distributor. Manifold fits a turbo up to a T76)
T61 Turbo w/ T4 flange
HKS 40mm Wastegate
3” SS304 Polished Downpipe w/ Flex Joint
3” SS304 Polished Midpipe
SS304 Polished Dump Tube
2 ½” Polished Aluminum IC piping
3” Polished Aluminum Intake Pipe
Boost Logic FMIC Kit
Boost Logic NA-T SS Braided Oil Feed and Return Kit w/ Aeroquip fittings
3” K&N Filter
K&N Breathers
Walbro GSS341 255HP Fuel Pump w/ Install Kit
All necessary clamps and bolts for installation
Cobalt gauges boost, air/fuel, egt
Found your forum while searching the web for turbo informaion for the sc300. I just ordered a Boostlogic turbo kit for my 97 sc300 and I am looking for anyone who has installed one before. I would like to know if what issues you had, how you like it and basic over all performance? Below is a list of parts that I will be installing. This is phase 1 and already planning phase 2, that is after I save up more cash. If you guys see anything else I missed please feel free to pipe in.
3mm head gasket
Greddy, Boost Controllers Profec B Spec II Black
Apexi, Fuel Computers S-AFC II (NEW Version 2) Black Face
550 cc injectors
Boost Logic 321SS Tubular Manifold 1 5/8” Tubing and 1/2” Thick 321SS Flanges
(Turbo’s with a 4” inlet clears the distributor. Manifold fits a turbo up to a T76)
T61 Turbo w/ T4 flange
HKS 40mm Wastegate
3” SS304 Polished Downpipe w/ Flex Joint
3” SS304 Polished Midpipe
SS304 Polished Dump Tube
2 ½” Polished Aluminum IC piping
3” Polished Aluminum Intake Pipe
Boost Logic FMIC Kit
Boost Logic NA-T SS Braided Oil Feed and Return Kit w/ Aeroquip fittings
3” K&N Filter
K&N Breathers
Walbro GSS341 255HP Fuel Pump w/ Install Kit
All necessary clamps and bolts for installation
Cobalt gauges boost, air/fuel, egt
Thread Starter
Rookie
Joined: Mar 2004
Posts: 61
Likes: 0
From: Georgia
Originally posted by Derf
From talking to Kean at boostlogic this one will have the 4". unless I miss understood him. The kit should arrive in 2 more weeks. Then I will post some photos of the kit.
From talking to Kean at boostlogic this one will have the 4". unless I miss understood him. The kit should arrive in 2 more weeks. Then I will post some photos of the kit.
my mistake, the t61 will have a 3".
Trending Topics
Thread Starter
Rookie
Joined: Mar 2004
Posts: 61
Likes: 0
From: Georgia
Originally posted by sc400texas
awesome! sounds like you have some fun ahead of you. I wish they made kits like that for the 4
- if you dont mind me asking what is the general price of a kit like this?
awesome! sounds like you have some fun ahead of you. I wish they made kits like that for the 4
- if you dont mind me asking what is the general price of a kit like this?
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Top 10 Lexus/Toyotas With The LEAST 5-Year Depreciation
Joe Kucinski
Lexus LC500 Convertible Auction: A Preview of Rising Values?
Brett Foote
GX 550 vs TX 550: Best 3-Row Luxury Lexus Family Hauler
Michael S. Palmer
9 Best Lexus Models You Can Buy for Half Price (And 1 You Shouldn't!)
Joe Kucinski
2026 Lexus NX Buyer's Guide: Models, Features, Prices & More!
Brett Foote
Lexus Champion
Joined: Jul 2001
Posts: 1,729
Likes: 2
From: California
Go with an AEM and get rid of the Mass Airflow sensor. Other wise you will still have the annoyance of possibly having the engine cut when you hit the gas and then have to brake. If you stay with the MAS setup get the larger newer one that comes in the SupraTT. It has much better flow.
Lexus Test Driver
Joined: May 2001
Posts: 1,312
Likes: 0
From: Florida
as far as i know, i am the only one with a boostlogic parts on their SC here. I really dont have the full kit from them, I am only using the FMIC pipes, and Manifold. Of those 2 things the quality looks awesome!
From the things mentioned it looks like your on the right track. I dont know what esle you are going to need, but if you do a search I am sure that you will be able to find all the info you can get.
Kevin
From the things mentioned it looks like your on the right track. I dont know what esle you are going to need, but if you do a search I am sure that you will be able to find all the info you can get.
Kevin
Thread Starter
Rookie
Joined: Mar 2004
Posts: 61
Likes: 0
From: Georgia
Originally posted by lexcoupe
as far as i know, i am the only one with a boostlogic parts on their SC here. I really dont have the full kit from them, I am only using the FMIC pipes, and Manifold. Of those 2 things the quality looks awesome!
From the things mentioned it looks like your on the right track. I dont know what esle you are going to need, but if you do a search I am sure that you will be able to find all the info you can get.
Kevin
as far as i know, i am the only one with a boostlogic parts on their SC here. I really dont have the full kit from them, I am only using the FMIC pipes, and Manifold. Of those 2 things the quality looks awesome!
From the things mentioned it looks like your on the right track. I dont know what esle you are going to need, but if you do a search I am sure that you will be able to find all the info you can get.
Kevin
Lexus Champion
Joined: Jul 2001
Posts: 1,729
Likes: 2
From: California
Originally posted by lexcoupe
as far as i know, i am the only one with a boostlogic parts on their SC here. I really dont have the full kit from them, I am only using the FMIC pipes, and Manifold. Of those 2 things the quality looks awesome!
From the things mentioned it looks like your on the right track. I dont know what esle you are going to need, but if you do a search I am sure that you will be able to find all the info you can get.
Kevin
as far as i know, i am the only one with a boostlogic parts on their SC here. I really dont have the full kit from them, I am only using the FMIC pipes, and Manifold. Of those 2 things the quality looks awesome!
From the things mentioned it looks like your on the right track. I dont know what esle you are going to need, but if you do a search I am sure that you will be able to find all the info you can get.
Kevin
Lexus Test Driver
Joined: May 2001
Posts: 1,312
Likes: 0
From: Florida
Originally posted by Derf
Can you list the parts and the mods that you have done to get 400+. I am still trying to get a good feel for what I will get out. Thanks for the info.
Can you list the parts and the mods that you have done to get 400+. I am still trying to get a good feel for what I will get out. Thanks for the info.
Originally posted by Hermosa
I have a jet coated manifold and downpipe and also a non-coated midpipe.
I have a jet coated manifold and downpipe and also a non-coated midpipe.
Kevin