Ok,now this is getting confusing.

 

OK I pulled the drivers side to get the part number.It is 67920-48060 A1 LH.

 

Thanks MEP7557 .

1NEAT_SC has the blue and he gave me his part# RF67920-48080-A0 for the LH side part.
The 48080 AO must be the blue illumination of the 450h and the 48060 A1 is the white for the 350....I think.

 

Let's hope!

 

LOL.. MEP...do you have a RX350 or 450h? Part number is slightly different (48060 vs 48080) the latter is what I received for blue. I think I would call and tell them which color you want and let them match it up... "A1" is the interior color (I think)lol

lar

 

I'm not ordering until I know for sure.

 

Sewell checkout part#for black interior is 67910-48060C0
The 48060 might be the white illumination for the 350 but the Sewell pic on their site below looks very blue..




Your 48080 is the blue for the 450h.

 

I have the RX350.

 

That explains the different numbers. Like Joe mentioned 48080 is for the 450H (blue) I tried to take a picture with my cell, but couldn't disable the flash. The picture Joe shows is a pretty good one.

Boy, we sure made that one hard...lol

lar

 

^ 1neat_sc, i agree with you, it's very difficult to take good pics of the illuminated door sills. i have tried several times (with and without flash), and it still doesn't look right. using the automatic settings on the camera just won't cut it, you will need to do more funky camera tricks to properly capture the mesmerizing look of the lighted sills.

 

Still difficult,lar
More puzzling is that Sewell has the same 67910-48060C0 part number for both the RX350 and RX450h in black and that part# is MEP's white illumination but it looks very blue in Sewell's pic...

 

Best thing to do is call and talk to a person and tell them what you want I guess. That's what I did because I wasn't for sure they had the blue. I had my doubts until I installed the sill. Even I'm confused and I have mine on...lol I believe there was another thread on this early in August that instigated me ordering mine. We've beat this horse to death

The picture you showed from Sewell's is the way they look.

cheers,

lar

 

https://www.clublexus.com/forums/5729179-post29.html

OK the horse isn't dead yet. Here are a couple of pictures I took after converting the door lights to LED. I have to say I think this is a true representation of the color.

 

Just when I think I'm out,you pull me back in...
I also changed the door courtesy bulb to LEDs and want the match too.
I also did the puddles with 4 LEDs flanks and the parking lights LED.
Went with V-leds.com 28 LED 5K 9006 HB4 for the fogs for a nice HID match without going HID fogs.They only pull 14 watts per side vs the stock 55 watt bulb.



Not a great pic but the match with HID,parking light and fogs are very nice.

 

I changed my puddle lamps as well. I went with 6000k halogen fog lights and they look better than the stock. I like the look of yours, good match. My illuminated door sills are slightly whiter than the door courtesy lights, not enough to get upset about, I think they look good.

My illuminated door sills don't look nearly as 'blue' as Sewell's picture.