Notices
RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

Wing Mirror

Thread Tools
 
Search this Thread
 
Old Apr 29, 2020 | 06:07 AM
  #1  
Burroo67's Avatar
Burroo67
Thread Starter
Driver School Candidate
 
Joined: Jul 2018
Posts: 30
Likes: 2
From: West Dunbartonshire
Default Wing Mirror

Hi Guys,Noticed today that my nearside wing mirror isn't fully dipping when I put the car into reverse, it moves very slightly but not as normal.. The mirror seems to be functioning properly when I move the mirror switch to 'L' and use the directional toggle switch, but not when the car is put in reverse.

Any ideas?
Reply
Old Apr 29, 2020 | 03:32 PM
  #2  
Felix's Avatar
Felix
Pole Position
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2019
Posts: 2,987
Likes: 608
From: The Jet City
Default

To have both mirrors dip down when in reverse, the switch needs to be in either all the way to the left or right, if you leave the switch in the center it won't dip down in reverse.
Reply
Old Apr 29, 2020 | 11:01 PM
  #3  
Burroo67's Avatar
Burroo67
Thread Starter
Driver School Candidate
 
Joined: Jul 2018
Posts: 30
Likes: 2
From: West Dunbartonshire
Default

Yeh I know that Felix. AS I said the mirror dips slightly whereas the offside mirror dips as it always has...
Reply
Old Apr 30, 2020 | 04:31 AM
  #4  
05ls430518's Avatar
05ls430518
Pole Position
5 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Nov 2017
Posts: 2,428
Likes: 267
From: New York
Default

Originally Posted by Burroo67
Yeh I know that Felix. AS I said the mirror dips slightly whereas the offside mirror dips as it always has...
He was just trying to help you out.......and your mirror motor is busted you need a brand new oem mirror or replace the mirror motor, easier to just buy an mirror assembly.
Reply
Old Apr 30, 2020 | 04:40 AM
  #5  
Burroo67's Avatar
Burroo67
Thread Starter
Driver School Candidate
 
Joined: Jul 2018
Posts: 30
Likes: 2
From: West Dunbartonshire
Default

...and I appreciate the help, but my original post mentioned the fact that the mirror works normally when in the left position (RHD Car) but not when put in reverse, so the motor still works but there is a problem with it dipping when in reverse. I discovered not long after buying the car 22 months ago that the mirrors would only dip in reverse gear when not in the neutral position. Someone has suggested that I remove the mirror and give the inside workings a right good clean and treat with loads of WD40 - I just wanted to know if any of my North American fellow owners had experienced the same problem. I meant absolutely no offence whatsoever to Felix.
Reply
Old Apr 30, 2020 | 06:57 PM
  #6  
joedaddy1's Avatar
joedaddy1
Racer
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2005
Posts: 1,981
Likes: 214
From: Orange County
Default

Cant you set the reverse setting?

Try adjusting the mirror to your liking while in reverse.
Once set, go back to park.
When you shift into reverse again, it should be on your new setting.
Reply
Old Apr 30, 2020 | 10:49 PM
  #7  
Burroo67's Avatar
Burroo67
Thread Starter
Driver School Candidate
 
Joined: Jul 2018
Posts: 30
Likes: 2
From: West Dunbartonshire
Default

Thanks Joedaddy1, will try that before I start dismantling the car!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TomDargan
SC430 - 2nd Gen (2001-2010)
3
Oct 26, 2019 09:52 AM
moodyblues
LS - 3rd Gen (2001-2006)
4
Dec 21, 2015 03:40 PM
Hotrod70
ES - 1st to 6th Gen (1990-2018)
5
Sep 7, 2015 03:10 AM
IsFast3r
IS F (2008-2014)
3
Dec 7, 2012 08:40 PM




All times are GMT -7. The time now is 05:41 PM.