Trip Information Problem on Navigation System?
Thread Starter
Driver School Candidate
Joined: Apr 2003
Posts: 8
Likes: 0
From: International
Trip Information Problem on Navigation System?
On the Navigation System, when I check the Trip Information (Fuel Consumption) screen, I noticed that the DISTANCE TRAVEL gets reset to 0KM or 0MI everytime I start the engine. According to the Navigation System Manual it states that the DISTANCE Travel gets reset to 0 after every fill up and not everytime I start the engine. Does your RX330 with NAV reset the Distance travelled after an Engine start or after a fill-up.
In other words do I have a problem or not?
Regards and Thanks in Advance,
In other words do I have a problem or not?
Regards and Thanks in Advance,
Pole Position
Joined: May 2003
Posts: 316
Likes: 0
From: Texas
you're confusing the CRUISING RANGE with the CRUISE DISTANCE..
Cruising Range is how far you can travel before you need to refuel - and that won't reset until you refuel
Cruise Distance is how far you've traveled since your vehicle has been started - if you turn the engine off it will reset to zero once restarted
Cruising Range is how far you can travel before you need to refuel - and that won't reset until you refuel
Cruise Distance is how far you've traveled since your vehicle has been started - if you turn the engine off it will reset to zero once restarted
Thread
Thread Starter
Forum
Replies
Last Post
cklh2000
ES - 1st to 6th Gen (1990-2018)
1
Oct 27, 2013 12:34 AM
Kyoto
Lexus Audio, Video, Security & Electronics
1
Mar 7, 2005 08:55 PM
