Notices
RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

Fuel Door Problem - need help

Thread Tools
 
Search this Thread
 
Old Jul 25, 2012 | 02:53 PM
  #1  
JAB's Avatar
JAB
Thread Starter
Instructor
 
Joined: Jan 2006
Posts: 1,016
Likes: 22
From: Virginia
Default Fuel Door Problem - need help

1999 RX300. The fuel door no longer flips open when the passenger compartment lever is raised. The lever does retract the pin that locks the flap, but the door does not 'spring open' when it should. I've never seen this problem reported before. Any suggestions on how this can be fixed? I suspect that there is some spring lever in the flap door hinge - is it user replaceable? TIA.

Last edited by JAB; Jul 25, 2012 at 03:13 PM. Reason: typo
Reply
Old Jul 25, 2012 | 02:56 PM
  #2  
vicsis250's Avatar
vicsis250
Pole Position
 
Joined: Jul 2012
Posts: 285
Likes: 0
From: Alhambra, CA
Default

It's possibly the cable does the handle feel lose?
Reply
Old Jul 25, 2012 | 03:14 PM
  #3  
JAB's Avatar
JAB
Thread Starter
Instructor
 
Joined: Jan 2006
Posts: 1,016
Likes: 22
From: Virginia
Default

It is NOT the cable. As I stated in my original post, the lever does retract the pin that locks the flap; problem is that once unlocked, the door does not 'spring open.'
Reply
Old Jul 25, 2012 | 03:45 PM
  #4  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,524
Likes: 1,375
From: Austin, TX
Default

First clean the the hinge with wd40 and add a lubricant.

If things start working you are done.

After confirming the hing is moving freely, you can try adjusting the metal push off strip ... half-way down the hinge. Study the push off and if you increase the angle, it would push off the lid a bit more. The spring action is based on tempering and the more it is subjected to adjustment(s) it will lose the bounce.

Salim
Reply
Old Jul 25, 2012 | 04:31 PM
  #5  
JAB's Avatar
JAB
Thread Starter
Instructor
 
Joined: Jan 2006
Posts: 1,016
Likes: 22
From: Virginia
Default

Problem solved. Dealer had the part in stock, p/n 77360-48010. $5.00. Installation took 2 minutes.

Last edited by JAB; Jul 26, 2012 at 11:28 AM. Reason: moe info
Reply
Old Jul 26, 2012 | 03:02 AM
  #6  
Lexmex's Avatar
Lexmex
CL Community Team
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2004
Posts: 17,318
Likes: 203
From: Miami, Florida
Default

Originally Posted by JAB
Problem solved. Dealer had the part in stock. $5.00. Installation took 2 minutes.
Had to do that not too long ago myself after mine cracked.
Reply
Old Aug 11, 2012 | 02:56 PM
  #7  
99rx's Avatar
99rx
Instructor
15 Year Member
iTrader: (6)
 
Joined: Dec 2009
Posts: 817
Likes: 35
From: Florida
Default

Mine fell off after adjusting it not too long ago. Amazing gooped it right back into place
Reply
Old Aug 12, 2012 | 10:27 AM
  #8  
orlonda's Avatar
orlonda
Rookie
 
Joined: Oct 2011
Posts: 50
Likes: 0
From: mo
Default

the button that comes ot to lock door just stays in so it never locks and doesnt spring open so i just stick a key and opens it .what could be the problem?
Reply
Old Aug 12, 2012 | 12:54 PM
  #9  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,524
Likes: 1,375
From: Austin, TX
Default

How about the release lever? Does it travel back to normal position? How is the feel as you pull it up?

You can clean the pin with wd40 and then use graphite lubricant.

Caution, you should investigate the condition of the cable and jacket. Staying open (pin pushed back) is less of a problem than pin staying stuck in lock position.

Salim
Reply
Old Aug 13, 2012 | 03:22 PM
  #10  
orlonda's Avatar
orlonda
Rookie
 
Joined: Oct 2011
Posts: 50
Likes: 0
From: mo
Default

The lever springs back ok. The door has no spring in it thiugh
Reply
Old Aug 13, 2012 | 03:45 PM
  #11  
99rx's Avatar
99rx
Instructor
15 Year Member
iTrader: (6)
 
Joined: Dec 2009
Posts: 817
Likes: 35
From: Florida
Default

Originally Posted by JAB
Problem solved. Dealer had the part in stock, p/n 77360-48010. $5.00. Installation took 2 minutes.
Originally Posted by orlonda
The lever springs back ok. The door has no spring in it thiugh
That is exactly what this thread is about.... Look at JAB's response above. He lists the part number in case you need to replace the spring piece completely.
Reply
Old Aug 14, 2012 | 07:10 AM
  #12  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,524
Likes: 1,375
From: Austin, TX
Default

Originally Posted by orlonda
The lever springs back ok. The door has no spring in it thiugh
I am confused ,,,,

Is the pin moving in/out freely ...

Is the door (with lever in release position) stay partially open. [Ask the help to hold the release as you swing the door close and let go].


Salim
Reply
Old Aug 14, 2012 | 08:05 AM
  #13  
99rx's Avatar
99rx
Instructor
15 Year Member
iTrader: (6)
 
Joined: Dec 2009
Posts: 817
Likes: 35
From: Florida
Default

Originally Posted by salimshah
I am confused ,,,,

Is the pin moving in/out freely ...

Is the door (with lever in release position) stay partially open. [Ask the help to hold the release as you swing the door close and let go].


Salim
His issue is exactly what this thread is about. The spring is either missing or broken.
Reply
Old Aug 15, 2012 | 04:52 AM
  #14  
salimshah's Avatar
salimshah
CL Community Team
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2001
Posts: 16,524
Likes: 1,375
From: Austin, TX
Default

Originally Posted by 99rx
His issue is exactly what this thread is about. The spring is either missing or broken.
Release pin stuck, got me off on a tangent. Thanks for clarification.

Salim
Reply
Old Aug 17, 2012 | 08:13 AM
  #15  
orlonda's Avatar
orlonda
Rookie
 
Joined: Oct 2011
Posts: 50
Likes: 0
From: mo
Default

Ok heres where im at with the fuel door it was missing the spring so i rigged that up until i can get to lexus dealer to get oem.I checked the xable and it retracts back and fourth but it seems the problem is that it doesnt cone out enough to catch th latch . The button is flush all the time. I sprayed wd40 but still doesnt come out anymore.any suggestions.
Reply



All times are GMT -7. The time now is 04:11 PM.