Said indicator light
Thread Starter
6th Gear
Joined: Mar 2017
Posts: 6
Likes: 0
From: Nj
Said indicator light
2001 rx-300. After rebuilding and servicing of front suspension, I now get an intermittent flashing of the Skid detector light with the corresponding warning sound. Totally random conditions on dry road surfaces. Any ideas for repair?
CL Community Team
Joined: Apr 2001
Posts: 16,583
Likes: 1,397
From: Austin, TX
Skid indicator kicks on when the left side wheels are not turning at the same rate and the right side wheels. The computer does allow a range of mismatch [as you make turns] but not beyond.
Check the wheel tone-ring, sensors and the wiring. During suspension work, ideally the sensors need to be removed and stored away. The wires have a high chance of getting pinched and the simplest of all is a bad connection at the connector.
Salim.
Check the wheel tone-ring, sensors and the wiring. During suspension work, ideally the sensors need to be removed and stored away. The wires have a high chance of getting pinched and the simplest of all is a bad connection at the connector.
Salim.
Thread
Thread Starter
Forum
Replies
Last Post
