License Plate Frames
Thread Starter
Driver School Candidate
Joined: May 2017
Posts: 12
Likes: 1
From: IL
License Plate Frames
Sorry for the boring question, but can anyone recommend any good, plain black, secure license plate frames? Every time I close the trunk lid, the plate rattles very loudly.
I'm also afraid that I'll damage the paint on the trunk lid from the plate rattling back and forth.
Thanks in advance
I'm also afraid that I'll damage the paint on the trunk lid from the plate rattling back and forth.
Thanks in advance
Advanced
Joined: Jan 2016
Posts: 604
Likes: 75
From: CA
Do you want a frame to just help with noise or with aesthetics too? I got one from either amazon or ebay...I forget now but it looks almost new a year later and no rattling what so ever and I like how it matches my theme. Mine was similar to this following link and I went with carbon fiber. Hope it helps:
http://www.ebay.com/itm/Black-Carbon...lRk67U&vxp=mtr
http://www.ebay.com/itm/Black-Carbon...lRk67U&vxp=mtr
Lexus Champion
Joined: Oct 2015
Posts: 2,424
Likes: 192
From: CA
go to home depot and get some of these: http://www.homedepot.com/p/Everbilt-...9565/203661091
put one or two on each lower corner of the plate/frame (on the back side). this keeps the plate from bouncing against the car. get a thin piece of Velcro or 3m 2-sided tape and secure the frame to the plate at the bottom, this keeps the frame from bouncing against the plate.
the issue is our cars only have top screws for the plate/frame.. if we had both top and bottom to secure the plate, or even a little plastic channel at the bottom to hold the plate this would not happen.
put one or two on each lower corner of the plate/frame (on the back side). this keeps the plate from bouncing against the car. get a thin piece of Velcro or 3m 2-sided tape and secure the frame to the plate at the bottom, this keeps the frame from bouncing against the plate.
the issue is our cars only have top screws for the plate/frame.. if we had both top and bottom to secure the plate, or even a little plastic channel at the bottom to hold the plate this would not happen.
Thread Starter
Driver School Candidate
Joined: May 2017
Posts: 12
Likes: 1
From: IL
go to home depot and get some of these: http://www.homedepot.com/p/Everbilt-...9565/203661091
put one or two on each lower corner of the plate/frame (on the back side). this keeps the plate from bouncing against the car. get a thin piece of Velcro or 3m 2-sided tape and secure the frame to the plate at the bottom, this keeps the frame from bouncing against the plate.
the issue is our cars only have top screws for the plate/frame.. if we had both top and bottom to secure the plate, or even a little plastic channel at the bottom to hold the plate this would not happen.
put one or two on each lower corner of the plate/frame (on the back side). this keeps the plate from bouncing against the car. get a thin piece of Velcro or 3m 2-sided tape and secure the frame to the plate at the bottom, this keeps the frame from bouncing against the plate.
the issue is our cars only have top screws for the plate/frame.. if we had both top and bottom to secure the plate, or even a little plastic channel at the bottom to hold the plate this would not happen.
Thread
Thread Starter
Forum
Replies
Last Post
Helterran
IS - 3rd Gen (2014-present)
6
Aug 19, 2014 09:38 PM
