AZ 2JZGE Cams in a 1JZGTE
#1
AZ 2JZGE Cams in a 1JZGTE
Does anyone know of any shops here in Arizona or somewhere in the U.S. that I can ship my GE cams to have them machined to fit my 1J? I was going to go with 264 cams but after some research, I've read that the GE cams are a decent upgrade and can be done for around $200. I would prefer a local shop but I wouldn't mind shipping them and waiting a little longer. I know Future Fab has a pretty good reputation and Suspicious Garage is a good place but does anyone else know of any other shops that specialize in this kind of stuff?
#2
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
I cant refer you to anyone but I cant tell you to what I know. The BC cams stage 2 are a great upgrade for the money. I would just spend a little more and drop and go. Still should be able to use stock shims also. Jmo. Gl on your choice.
#4
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
No you dont have too. I used the oem 1jz ones and had no problems whatsoever. If you decide to go with bc just measure the shims installed and make sure they are in within spec. I didnt have to change ANY of my shins around whatsoever. Others I have read on sf that had too.
#6
Lexus Test Driver
iTrader: (1)
Join Date: Dec 2008
Location: fl
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
2 JZ GE cams will not just drop in after machining they are designed for a distributor and as such are missing CPS sensors and a 1jz is COP.
2 JZGTE CAMS after machining will go in to a 1 JZGTE HEAD!!!!!
Just pick up BC 264's and call it a day great upgrade.
2 JZGTE CAMS after machining will go in to a 1 JZGTE HEAD!!!!!
Just pick up BC 264's and call it a day great upgrade.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
boostd4
Performance & Maintenance
21
04-09-10 01:34 PM