does anyone locally have a fender roller? i would like to get my fenders rolled a good amount and would like to know if anyone here has a fender roller that can help me.. thanks

 

Kenji, If you just use a regular hammer and TAKE YOUR TIME, you can usually do a lot better job putting a lot less stress on your fender. I have done every car I have ever owned and have yet to chip the paint other than on the backside of the fender. I just did my Qs last weekend.

 

try this method too...it sure works...i just did it for my LS

http://www.youtube.com/watch?v=Wxmw-4A0DEQ

 

haha that video is awesome! I saw it along time ago. I need to roll my fenders too Kenji but I'm scared to do it. lol. There is a shop in Woodinville that does it. Mostly on drifter cars but will do it for our cars if you're interested.

 

Don't cheap out and do the Honda/Nissan DriFtz0R method by using a hammer or bat. Go to a good shop and pay for the work to be done RIGHT. Unless you want uneven bends and cracked/stripped paint that is PM Marc (audi2nr) and ask where he got his done.

 

Kenji, come down to Drift Office and we can roll your fenders for you, however I would caution you that it might damage your paint on your fenders.

Drift Office
253-520-3888

Mike

 

Usually if you heat up the paint it will be fine, correct?

 

You can also try giving JMI Motoring a call 360-403-1683. If they can make a convertible xb

I'm sure they can roll some fenders. Thats where me and audi2nr got out paint and stuff done although I am not sure if they rolled audi2nrs fenders there

 

usually that will work but honestly **** happens.

Mike

 

Just cut them with an electric saw, and then have them sanded and touched up with paint. I did this with my Civic back in 94'

 

Check with and auto parts store like advanced auto, they rent tools. THey might have a fender roller you can use. I've read somewhere that it's also good to heat the part your rolling so hte paint doesn't flake/chip.

 

Talk to supramangs. He borrowed a roller from someone on here.